No, does not have 4 meter mod.
The resistors on the board don’t seem to be 0 ohm, they’re 1 ohm. ?Have others found this? ?All documentation I can find says it doesn’t matter.?
toggle quoted message
Show quoted text
On Feb 26, 2022, at 10:01 AM, Andrew Lenton <
a@...> wrote:
I have enclosed a pic of mine TX ?1.8 to 70 140 to 174 420 to 470 MHz I removed the batter for better pic
?
?
Avoid Transmitting 30 to 40 MHz as the HF low pass filter will heat up and burn at 100 Watts
?
Does your Japan Model have the 4M UK Mod or not?
?
73
?
Andrew
?
?
?
Also try 111010.?
It seems there are different configurations , and possibly conflicting evidence.?
I doubt if Yaesu would make a custom IC, just for JA market
?
On Fri, 25 Feb 2022 at 21:36, Carl KO4SSA via
??<cbeaudette99=
[email protected]> wrote:
nope, still get “error”
press FAST and LOCK, and power up,
menu 39 ALL INIT, press MCK/W,
Try TX on 144 MHz ?—> ?works
Try TX on 147 MHz —> “error"
On Feb 25, 2022, at 2:47 PM, Andy Bosworth <
sidthepop@...> wrote:
?
On the jumpers try 101011 by jumper number, do? reset after.?
Should give HF coverage, 144-148 and 430 -450
?
On Fri, 25 Feb 2022 at 19:32, Carl KO4SSA via
??<cbeaudette99=
[email protected]> wrote:
Hi FT-847 fans!!
This is Carl, KO4SSA.
I just purchased a used 847 on eBay, from Japan.? I’m wondering how to modify for US bands.? As delivered only TX 144-146 and 430-440.
I’ve searched high and low on the the web, including Colin, G1IVG’s page, and emailed him!!? Haven’t heard back.??
I’ve tried several solder joint configurations and will not TX on 146.52 or 445000. About to give up.? Is the Japan stuff transmit range burned into EPROM or something????
Colin lists several HF coverage configurations and I am able to transmit on 14.550!!? (into dummy load of course)? I point out as evidence that changing the solder jumpers did do SOMETHING.? Also, initially the cross-band repeater item was not available on the menu and now it appeared.? More evidence that changing the jumpers did something.
Thanks Carl
?
This email has been scanned by BullGuard antivirus protection.
For more info visit?
<20220226_145618.jpg>
