On 22 Dec 2021, at 00:42, Micky Corrow <opus@...> wrote:

?Greetings.

I know it probably has been discussed an unknown number of times previously, but I want to start using my 847 in the digital modes, both on HF as well as 6M + VHF/UHF. I want the members here to create the Ultimate FT-847 Digital Guide.

Let me take a moment to describe my setup - I have separate antennas and amplifiers for each output on the 847. Each amp is hard-keyed by the 847, via a special breakout cable I obtained on ebay. It works great. I don't want to use the mic input on the front of the radio for data, I have a mic connected there and I don't want to be switching cables for different bands.

I have a laptop running JTDX and FLDigi, I would like to use CAT control to manage frequencies, but it is not cast in stone. I know how to push buttons and spin the dial... I use Log4OM v.2 for logging, and I use JTAlert for needed entities alerts. I have all three (minus FLDigi) apps integrated with each other to work seamlessly. The big unknown is the FT-847.?

I would like suggestions on how to integrate the computer with the radio so that I can feed it from the ports on the back and manage the drive and the ALC from the front. The laptop has an internal sound card that I feed some speakers with to hear the alerts, and an inexpensive USB sound card to feed the radio. If at all possible I would like to use CAT control to switch frequencies and modes, but so far that has been problematic for me, so suggestions there wouldn't hurt.

In the end I would like to compile all the suggestions and guides into one document and upload it to the Files section so that others don't need to reinvent the wheel each time they dig into digital with the FT-847.

Thanks in advance.
Micky K1XH?