Morning Bruce
I just looked at the website
for Advanced Receiver Research, and they say all their
receivers require
25ma. Well within the
parameters for the 847.
Even the military receivers
were at 25ma.
Hope this helps.
Happy Hunting
Stay Safe
73
Douglas Richards VE3FFR
On 10/20/2020 1:04 AM, Bruce Forsberg
wrote:
I just acquired a used FT-847 and plan to use it for VHF/UHF work
including getting into satellites. I have one question. I plan to
get preamps and am looking at 2M and 75cm mast preamps from
Advanced Receiver Research. They require 200mA each. The Yaesu
manual says it can supply 300mA to the VHF AND/OR UHF connectors.
I am confused if this a total for both connectors conbined or 300
mA each? Looking at the schematic I see there is one current
limiter for both connectors so I assume this is a total number. I
am wondering if anyone has run into this?
Thanks,
Bruce, WB6IZG
--
73
Douglas Richards VE3FFR
ve3ffr@...
