开云体育

Wish i could help but I have not attempted this.

I hope someone will respond.

73

Leslie, ad5wb

On Tuesday, January 23, 2024 at 02:21:47 PM CST, Sanjeev KN6MUQ via <s_taran=[email protected]> wrote:

Hello?
I have a vx-7r and I am trying to get to the shortwave stations programmed into this transciever. I pressed function-9 (spcl) and select option 5 which is BC Station. However, I am unable to save this option by pressing PTT so I cannot get out of this menu option unless I set the special memory option to off. Has anyone experienced this issue. I would appreciate any insights.?

Regards
-Sanjeev

You're close.? Make sure the vx7r is in single band mode on the A channel.? Then press the MON/F button then SPCL. Select BC and click the PTT.? The clue is to be in single band mode on A.

Hope this works

73, Floyd(WD8DUP/DA1VF)?

On Wed, 24 Jan 2024, 16:06 ad5wb via , <ad5wb=[email protected]> wrote:

Wish i could help but I have not attempted this.

I hope someone will respond.

73

Leslie, ad5wb

On Tuesday, January 23, 2024 at 02:21:47 PM CST, Sanjeev KN6MUQ via <s_taran=[email protected]> wrote:

Hello?
I have a vx-7r and I am trying to get to the shortwave stations programmed into this transciever. I pressed function-9 (spcl) and select option 5 which is BC Station. However, I am unable to save this option by pressing PTT so I cannot get out of this menu option unless I set the special memory option to off. Has anyone experienced this issue. I would appreciate any insights.?

Regards
-Sanjeev

Be sure you are in Single Band operation for some features to work properly.
?As much as I love my VX-7r, I also get frustrated with how to access some of the sub menus and features. if you dont use them often, you WILL forget. I had to create a cheat sheet with the steps to get from here to there type things

Sincerely,

?Mr. Chris A. Robinson?

?KF6NFW / WQOQ661

On Wed, Jan 24, 2024 at 11:30?AM Floyd Bixler <wd8dup@...> wrote:

You're close.? Make sure the vx7r is in single band mode on the A channel.? Then press the MON/F button then SPCL. Select BC and click the PTT.? The clue is to be in single band mode on A.

Hope this works

73, Floyd(WD8DUP/DA1VF)?

On Wed, 24 Jan 2024, 16:06 ad5wb via , <ad5wb=[email protected]> wrote:

Wish i could help but I have not attempted this.

I hope someone will respond.

73

Leslie, ad5wb

On Tuesday, January 23, 2024 at 02:21:47 PM CST, Sanjeev KN6MUQ via <s_taran=[email protected]> wrote:

Hello?
I have a vx-7r and I am trying to get to the shortwave stations programmed into this transciever. I pressed function-9 (spcl) and select option 5 which is BC Station. However, I am unable to save this option by pressing PTT so I cannot get out of this menu option unless I set the special memory option to off. Has anyone experienced this issue. I would appreciate any insights.?

Regards
-Sanjeev