开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date

Re: Keep FT-60 on Standby ?

 

开云体育

Hey Clint

You took one snippet of my message and dissected it out of context.

The moral of the story is what I said after the quoted part: "It is not good for the battery to operate the radio, and be charging at the same time."

Now do you agree or disagree with this part of my reply?

73

Wassim
WN6WJN


Re: cable for chirp

 

开云体育

I had similar problems when I first tried to use FT-60 Commander. The solution was to go on the transfer menu and select the Alternate Write Method.

+++++

Jerry

KG7NOR

+++++


Live simple, love well, and take time to smell the flowers along the way. ~ Mark Twain



On Jun 29, 2016, at 17:38, eagle127@... [FT-60] <FT-60@...> wrote:

?

I downloaded the FT-60 commander Software and I have the cable for the FT-60 radio but I get an error no matter what port I try using. I'm running windows 10 but I wouldn't think that would have any affect on it. Any suggestions or is their something I'm missing?


Re: cable for chirp

 

开云体育

If your cable shows to be a Prolific, roll your driver back to 3.2.0.0. You can find this at . Make sure you use the same USB port each time.?

Jardy Dawson WA7JRD
Sent from the Death Star for Darth Vader's eyes only. Any other reception will be severely punished. ?

On Jun 29, 2016, at 16:41, eagle127@... [FT-60] <FT-60@...> wrote:

?

I downloaded the FT-60 commander Software and I have the cable for the FT-60 radio but I get an error no matter what port I try using. I'm running windows 10 but I wouldn't think that would have any affect on it. Any suggestions or is their something I'm missing?


Re: cable for chirp

 

I downloaded the FT-60 commander Software and I have the cable for the FT-60 radio but I get an error no matter what port I try using. I'm running windows 10 but I wouldn't think that would have any affect on it. Any suggestions or is their something I'm missing?


Re: cable for chirp

 

开云体育

When I got the FT-60R, my first radio, someone told me about FT-60 Commander. I've been using that piece of software now for nearly 2 years. It works fine, but does have one oddity. Occasionally, it will switch comports for unknown reasons. The first time it happened, it took me a while to figure it out. It's done that one additional time since then, but it's an easy fix so, at most it's at minor irritation. The problem with peers to occur after Windows updates. Go figure.?

+++++

Jerry

KG7NOR

+++++


Live simple, love well, and take time to smell the flowers along the way. ~ Mark Twain



On Jun 29, 2016, at 03:22, cappers1001@... [FT-60] <FT-60@...> wrote:

?

Hi Chris,

I bought a cable from here .

I had a few issues initially, but that was more to do with Chirp than the cable

My FT60 is now programmed with plenty of local repeaters


Good luck


Dave

M0IKT

?


Re: cable for chirp

 

Hi Chris,

I bought a cable from here .

I had a few issues initially, but that was more to do with Chirp than the cable

My FT60 is now programmed with plenty of local repeaters


Good luck


Dave

M0IKT

?


Re: cable for chirp

 

Hi Chris,
?I was just looking at one of these on ebay.? I have one somewhere but looks to have been lost in my many moves... The one on ebay is most certainly a knock-off but you should be okay if you use the driver that comes with it and restrict Windows from trying to update it.
USD cost is 9.99 Irish Pound is 7.11? See if they will ship to you, if not, then I'm willing to help you out and get one to you.? You can look me up on and maybe we can schedule a contact also on HF or on the local IRLP repeaters.

?



Best of luck to you!

73
John
N6ZP

?


Re: cable for chirp

 

went ?on E bay and did a search for FT 60 ?cables and this is what I found. I have bought a number of cables from this seller and never had a problem?



VE6KJM?
Kevin

On Tue, Jun 28, 2016 at 8:57 AM, mi0jzz@... [FT-60] <FT-60@...> wrote:
?

hi group am a newbie to the group and to the ft60

am looking for the cable to operate the chirp program

there quiet expensive here in the UK, does anyone

have one spare or is selling one and willing to post

to northern Ireland uk GI/MI.

I`ve seen in the files that you can make your own

but I have hands like feet when it comes to that kinda stuff hi hi


tnx in advance

chris............mi0jzz





--
Kevin
VE6KJM


cable for chirp

 

hi group am a newbie to the group and to the ft60

am looking for the cable to operate the chirp program

there quiet expensive here in the UK, does anyone

have one spare or is selling one and willing to post

to northern Ireland uk GI/MI.

I`ve seen in the files that you can make your own

but I have hands like feet when it comes to that kinda stuff hi hi


tnx in advance

chris............mi0jzz



Re: New vs Old

 

开云体育


On Jun 25, 2016, at 22:15, I wrote:
I use eneloops at work for wireless mice and keyboards. Sounds like it’s worth taking both radios with the AA packs into work and trying them out. ?Buying three chargers with 4 batteries each would let me charge 12 at a time.

The eneloops in the FBA-25s worked in both the old radio and new one. However, the new radio is very tight with the eneloops and only tight with the alkalines. The old radio is comfortable with either. Given how well the radio is doing for us with the factory rechargeable and how little we use VHF/UHF, I think we’re just going to stick with the alkalines for backup. We have 38 left after filling the 2 battery trays.



Re: New vs Old

 

Poswerswerx/Maha 2500 and 2700 mAH AA NiMH cells fit perfectly in every FBA-25 I own - from 2004 to last month's models of FBA-25 packs.

Make sure you feel the "click as you press in the positive tip on each cell. I have yourcombination in a couple FBA-25 on FT-60R units - all is well.

Clint K6LCS


Re: New vs Old

 

开云体育

I use eneloops at work for wireless mice and keyboards. Sounds like it’s worth taking both radios with the AA packs into work and trying them out. ?Buying three chargers with 4 batteries each would let me charge 12 at a time.

On Jun 25, 2016, at 09:17, Jerry Stein stein525@... [FT-60] <FT-60@...> wrote:


I have the same problem (battery case can't be clipped to the radio)?with two battery cases using Eneloop batteries.

+++++
Jerry
+++++

Live simple, love well, and take time to smell the flowers along the way. ~ Mark Twain


On Jun 24, 2016, at 21:19, Joel?hiqual@...?[FT-60] <FT-60@...> wrote:

?

Problem I have is the AA battery case for my New FT60 will not close when good?
hi cap AA's are in it - only alkalines - the NiMh are just a little too big. I have Powerex
2500 Mah cells.?

?

On 06/24/2016 08:13 PM,?jtkeyz@...?[FT-60] wrote:
?

I don't buy replacements for stock 1400mAh battery on my older FT-60 (circa 2007).? I have a AA case and use Eneloops religiously.? The only time the stock battery is used is while the Eneloops are charging.? The original 1400mAh?battery is starting to go low much?quicker now than it did when it was new.? So, I'll toss it soon and buy six more 2000mAhEneloops for the AA case.? Much more reliable, longer transmit life?and don't have to worry about overcharging with the wall wart.? I have two separate NiMh chargers that accommodate 4 cells each. In the long run, I find this more economical than buying a "quality" replacement for the original battery.
73
John
KU8Q

--
KQ?J




Re: New vs Old

 

That why you see the previous post only uses the 2000 mah instead of the 2500's.? The get the higher capacity by making the battery bigger not by using better internals.


Re: New vs Old

 

开云体育

I have the same problem (battery case can't be clipped to the radio)?with two battery cases using Eneloop batteries.

+++++

Jerry

+++++


Live simple, love well, and take time to smell the flowers along the way. ~ Mark Twain



On Jun 24, 2016, at 21:19, Joel hiqual@... [FT-60] <FT-60@...> wrote:

?

Problem I have is the AA battery case for my New FT60 will not close when good
hi cap AA's are in it - only alkalines - the NiMh are just a little too big. I have Powerex
2500 Mah cells.

?

On 06/24/2016 08:13 PM, jtkeyz@... [FT-60] wrote:
?

I don't buy replacements for stock 1400mAh battery on my older FT-60 (circa 2007).? I have a AA case and use Eneloops religiously.? The only time the stock battery is used is while the Eneloops are charging.? The original 1400mAh?battery is starting to go low much?quicker now than it did when it was new.? So, I'll toss it soon and buy six more 2000mAhEneloops for the AA case.? Much more reliable, longer transmit life?and don't have to worry about overcharging with the wall wart.? I have two separate NiMh chargers that accommodate 4 cells each. In the long run, I find this more economical than buying a "quality" replacement for the original battery.
73
John
KU8Q

-- 
KQ?J


Re: New vs Old

Joel
 

开云体育

Problem I have is the AA battery case for my New FT60 will not close when good
hi cap AA's are in it - only alkalines - the NiMh are just a little too big. I have Powerex
2500 Mah cells.

?

On 06/24/2016 08:13 PM, jtkeyz@... [FT-60] wrote:
?

I don't buy replacements for stock 1400mAh battery on my older FT-60 (circa 2007).? I have a AA case and use Eneloops religiously.? The only time the stock battery is used is while the Eneloops are charging.? The original 1400mAh?battery is starting to go low much?quicker now than it did when it was new.? So, I'll toss it soon and buy six more 2000mAhEneloops for the AA case.? Much more reliable, longer transmit life?and don't have to worry about overcharging with the wall wart.? I have two separate NiMh chargers that accommodate 4 cells each. In the long run, I find this more economical than buying a "quality" replacement for the original battery.
73
John
KU8Q

-- 
KQ?J


Re: New vs Old

 

开云体育

I don't buy replacements for stock 1400mAh battery on my older FT-60 (circa 2007).? I have a AA case and use Eneloops religiously.? The only time the stock battery is used is while the Eneloops are charging.? The original 1400mAh?battery is starting to go low much?quicker now than it did when it was new.? So, I'll toss it soon and buy six more 2000mAhEneloops for the AA case.? Much more reliable, longer transmit life?and don't have to worry about overcharging with the wall wart.? I have two separate NiMh chargers that accommodate 4 cells each. In the long run, I find this more economical than buying a "quality" replacement for the original battery.
73
John
KU8Q


Re: New vs Old

 

Thursday, 23 Jun at 22:22 EDT - It all arrived this afternoon. As several here suggested, the radio is made in Japan and the batteries in China. The only difference I notice is the new radio stands up without wobbling—not sure why. I can’t see any difference, but it’s there. I can’t see or hear any difference with weak signal reception between the old and the new. If one shows stronger than the other, I swap positions and both radios perform the same in the stronger position.


I charged up both new FNB-83 batteries on the two new SBH-13 charging cradles and PA-48B wall warts. It’s weird not to see a green LED when charging is finished, but I suppose that would use too much energy for the California Communists.


The old “good" battery will continue to go in the VAC-370 Rapid Charger (as will the new batteries when fast charge is needed).


The two FBA-25 AA alkaline packs are waiting for a 50-pack of Eveready Energizer Max AA (E91) for $18.99 shipped from eBay. If I go with loose NiMH, I want to do some research on eneloop vs Powerex first.


Setup:


Added password in PSWD W
Changed PSWD to PWD. ON
Added call sign to CW WRT
Changed CWID to TX ON
Reprogrammed P1 key to DC VLT
Kept RXSAVE at 200 MS
Changed TXSAVE to SAV. ON
Changed TOT to 2MIN
Kept APO at OFF
Kept ARS at ARS. ON
Changed NAME to ALPHA


All our memory entries use call sign labels. I put 2m in the first one hundred memories and 70 cm in the second hundred. Then I divide the hundreds into tens. The first ten (0-9 or 100-109) I reserve for quick temporary or miscellaneous entries, and the next 9 sets of 10 represent counties. So for us, the first memory digit (or lack thereof) represents band, the second digit the county, and the last, my repeater number assignment for that county. I try to keep the 3rd digit the same for repeater call signs with both 2m and 70cm repeaters.


Anyway, this wraps up my saga of getting a new FT-60R for me and getting my wife’s back up to speed.



Moe
AB8XA


Re: New vs Old

Joel
 

开云体育

That is technically correct but that being said, I would get three years and more out of a set of
cheap nimh cells? from walmart that had more capacity then the stock battery pack. I would
hook it up for a few hours and unplug it - knowing not to abuse them.?

On 06/23/2016 08:43 AM, clint@... [FT-60] wrote:
?

In all honesty, pumping unregulated constant current into a NiMH cells - like what was shipped with the FT-60R until 2013 - is NOT the best way to charge those packs.


The intelligent charger that now comes with new FT-60R will provide us a coulple hundred more discharge-charge cycles. That's a benefit in our favor - no matter what politics may have been involved.

Clint K6LCS
?

-- 
KQ?J


Re: New vs Old

 

When she first won that radio, my wife was using the wall wart charger that came with it plugged into the side of the radio. At some point, and I can't remember when, I bought her a second battery and the?VAC-370 rapid charger/cradle--I suspect that was maybe four years ago. Then, at some point later, she decided to take everything down to the basement, to have in case we went down there in a tornado. I don't argue.

The radio and one battery spent at least a couple of years, maybe three or more, down there in the?VAC-370, while the other battery never got charged again. Bottom line is she has one battery that lasts a pretty good while in use, and another that doesn't last long at all.

Since she doesn't transmit nearly as much, I'm taking her decent battery as a backup for me (and the VAC-370), and buying her a new battery and a charger setup like what's coming with my new one (happy wife, happy life). And we'll both get a AA tray.

My new radio and other gear is Out for Delivery, :D




Re: New vs Old

 

In all honesty, pumping unregulated constant current into a NiMH cells - like what was shipped with the FT-60R until 2013 - is NOT the best way to charge those packs.

The intelligent charger that now comes with new FT-60R will provide us a coulple hundred more discharge-charge cycles. That's a benefit in our favor - no matter what politics may have been involved.

Clint K6LCS
http://www.work-sat.com?