开云体育

A quick search I found this https://amrron.com/wp-content/uploads/2018/03/FT-60R-Beginners-Guide.pdf also there's several YouTube videos out there. You might try it with just the TX tone and no RX

Scott, since you've programmed your FT60 via software, I'm not sure why some folks are giving you programming advice. My guess is that you have just discovered most repeaters don't have a lot of

There is no such thing as a single "national" WX frequency.

To each his own. Learning the manual programming process is part of the fun for me. Plus, it means I won’t have to depend utterly on software if something goes wrong. Did I miss exactly what

To switch between Frequency or Name view press the FW button then 0 (set) go to Menu 27 (Name) press FW turn knob from Alpha to FREQ press FW to set it then press PTT to go back to normal

Scott, if you are having problems programing & get stuck you may be better off doing a factory reset and start out fresh. Just something to keep in mind. -- Gary KY8M , MI.

Chris, I never even tried my Adams 1-J cd. My needs are simple, only listen to maybe 5 or 6 repeaters. Once in awhile I'll just let it scan all bands. -- Gary KY8M Macomb, MI.

Yep, or just hold down the 1 key for a second, switches to the weather band. 73, Chris <https://www.qrz.com/db/ve3rwj> VE3RWJ on qrz.com <https://twitter.com/smartguitar1> Follow Me

The FT-60 is easy to program from the radio itself. 73, Chris <https://www.qrz.com/db/ve3rwj> VE3RWJ on qrz.com <https://twitter.com/smartguitar1> Follow Me On Twitter Sent:

I do not use any software to program mine. I was going to have you tap the vfo via V/M and put in 162.550 and see if you hear the national weather station to make sure the radio receiver is working

No, I can't see the frequencies, just the names...? Wish I could send you a screenshot of the software I used...? Just sent it to another person. Sorry, Scott - KC3VUH

Scott can you see the frequencies on the LCD readout? -- Gary KY8M Macomb, MI.

I’ll give it a try… 1. Press the * key to switch to VFO mode. 2. Enter the output frequency of a repeater. 3. Press F/W (bottom right) then 1, and turn the knob on the top until the

So this is what I got off of RepeaterBook.com.? I was unaware that RadioReference costs money.? These are the repeaters within 10 mi of Johnstown.? I programmed them in the radio via the software

That popped up on a group I own. He joined, then changed his email address twice, then posted the equipment scam. This is a reason you should be watching your subscription notices and especially have

Thanks for this tip. I have the perfect insurance against scams like this one. My wife thinks I’ve spent enough on amateur radio until next year. No kidding. As for potential or actual victims, I

I've already seen the scam show up on some groups.io communities I belong to. I'm not going to include a copy of the email here, but I will describe it briefly. The email spoofs the identity of a

Yep. Priority Scan problem. Got things working now. Tankew. R

Check that menu item 43 (SCN MD) is set to 'MEM'. If it's set to 'ONLY' and if any of your memory channels are configured as 'ONLY' (flashing '>' top left of display) then only those will be scanned.

Sounds like you have PRIority scan going. Check the manual. Jardy Dawson WA7JRD Message sent by....Oh look!! Pretty lights!!