开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Yaesu-FT-60
  2. Messages
Single Messages Topics Expanded Polls

Re: DIY Programming Cable

 

If you look to the FT-60 schematic you will see that on the data line there is a pullup resistor,
R1168, 47 k, which goes to the 3 V bus (regulator Q1001.)
So no need for an external resistor.
I admit that I looked to the schematic after building the interface ;-)

73 Giovanni IZ5PQT


Il giorno dom 27 ago 2023 alle ore 17:52 Dale Robins - 2W0ODS <dale.robins@...> ha scritto:
The specification requires a pull up resistor and a diode end of discussion. To say it's not needed is careless and could damage someone's radio. There is simply no need to be ignorant and defensive.

I was typing my long winded reply outside in a hot tub. I work with 1000s of different models and do not know the radio pinout off the top of my head. Regardless of what line it uses the radio requires an external pull up resistor. I had to say something before others copy you and make the same mistake.

What do I know, I only run a business that manufactures programming cables and interfaces, repair amatuer and professional radio equipment, amongst many other things.

Join [email protected] to automatically receive all group messages.