W1ZHU:
That's usually an indication the battery is bad or not charged. It has enough power on receive, but not on transsmit.
Dave - WB6DHW
toggle quoted message
Show quoted text
On 9/16/2021 8:38 AM, KJ Bald via groups.io wrote:
I haven't used my FT60 for quite a while. After reading the latest post I dug it, and that's when I started losing my mind too.
When I press the PTT switch to transmit the radio acts like it is powering on: screen goes blank; radio "beeps;" it lights and displays 7.4V; then it displays the frequency (it's defaulting to 430.000).
I tried the reset: Off > MONI/on > dial ALLRST > press FW and all I get is the same as above.
Any suggestions?
Thanks.
W1ZHU
