¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Yaesu-FT-60
  2. Messages
Single Messages Topics Expanded Polls

Re: Rig to Rig Cloning

 

I agree. CHIRP is great (when it works). RT Systems is good if you have multiple radio models and need to program a large amount, but it's pricy. RT Systems also has different programs for nearly identical radios so you have to pay for a new program. The Yaesu FT-8800 and 8900 is just one example.

Randy
N4QWK



-----Original Message-----
From: JARDY DAWSON via groups.io <JARDY72@...>
To: [email protected]
Sent: Wed, May 27, 2020 9:11 am
Subject: Re: [Yaesu-FT-60] Rig to Rig Cloning

Cleanest and cheapest option is CHIRP. RT Systems is fine if you have lots of money to spend. I do not know of any radios that have been bricked by CHIRP.?




On Wednesday, May 27, 2020, 03:35, Brian Smithson <brianesmithson@...> wrote:
As Clint says, each radio is am RT systems SKU. Some use the same cable, most do not.?

Still, if you have several radios and want to keep them programed the same, it's the cleanest option.

73

Brian n8wrl

On Tue, May 26, 2020, 9:55 PM Christian Sweningsen KD2LIN <csweningsen@...> wrote:
Brian, are you able to do that with one cable and set of software? As I recall they make it *sound* as though setups are needed for each.

??? ??? Thanks, Christian KD2LIN

On 5/26/2020 9:27 PM, Brian Smithson wrote:
RT systems is the way?to go. Easy to copy?and paste data between files which are then written to radios. I do it with vx3, ft60, ft70, several ft880's, and an alinco 735.

73

Brian

On Tue, May 26, 2020, 9:19 PM Randolph Urick via <raurick=[email protected]> wrote:
You cannot clone from one model to a different model. All you can do is copy the file, CHIRP, RT, etc., from one file to another file and reprogram that way. 73

Randy
N4QWK



-----Original Message-----
From: lemk1ter via <lemk1ter=[email protected]>
To: [email protected]
Sent: Tue, May 26, 2020 12:39 pm
Subject: [Yaesu-FT-60] Rig to Rig Cloning

Apologies if this has been covered!? I have a 60R, VX5, and a FT2DR.? My question - can I clone from one model to another (i.e.; 60R to VX5) or does cloning only work between the same models (60R to 60R)?
Terry - km0u

Join [email protected] to automatically receive all group messages.