Before boring. drilling or reducing pin size find another PL-259 and verify it will not fit in the SO-239
connector. I have worked with SO-239's and PL-259's for nearly 60 years and the only time they do
not mate is when something has seriously distorted the connectors. Something is broke, fix it, instead
of working around the breakage.
If a second PL-259 fits then the original PL-259 is bad. Replace it. If the second PL-259 does not
fit then examine the SO-239 for something left in the socket center or damage to the center cylinder.
Regards
WD4HXG
On December 15, 2019 at 10:43 AM, "Kevin McCoy" <ve6kjm@...> wrote:
Has maybe the old PL 259 center pin stayed in the radio , It happened to a fellow ham and he was prepared to send it back to the dealer.?
On Sun, Dec 15, 2019 at 2:09 AM JARDY DAWSON via Groups.Io <JARDY72=
[email protected]> wrote:
Wouldn’t it be easier to use a small drill bit to make the receiving hole slightly larger?? Do by hand only?
Jardy Dawson WA7JRD
Message sent from some electronic device that only the Manufacturer of said device really cares about.?
On Dec 14, 2019, at 22:32, Chris Smart <csmart8@...> wrote:
hmm, could you carefully file the center pin down a bit?At 01:20 AM 12/15/2019, you wrote:This question relates to the Yaesu FT-8800, not to the FT-60. Sorry about the intrusion, but I know that there are some very knowledgeable hams on this group, and I hope someone will be able to help me. Thank you in advance.
The ?diameter of the chassis SO-239 socket on my Yaesu FT-8800 is too small to accommodate the centre pin of the PL-259 connector from my antenna coax (It worked until a couple of months ago, but I recently moved and now there is no way I can fit the PL-259 ?pin into the SO-239 socket; I know it sounds crazy, and it is driving me crazy, but the diameter of the SO-239 on my FT-8800 is definitely smaller than on a couple of other radios I have, and smaller than on a HS05 cable I use with one of my handhelds).
Any suggestion?
Where can I find PL-259 connectors with a thinner (less fat) centre pin, or an adapter connector with thinner PL-259 to regular SO-239?
Bernard Rochet
VA7BLR
--
Kevin - VE6KJM
(780) 278-5103?
