Re: Memory Bank Recall Function
|
Don, ? My manual also shows Memory Bank Scan on page 39 but the figures do not show the ¡°b¡±. Not sure if you are saying that your copy of the manual shows the ¡°b¡±. However, it is certainly doing a bank scan. ? It wasn¡¯t that page 33¡¯s Memory Bank Recall was wrong, just did not fully explain to me what to expect and what will happen if I do anything wrong. As a newbie, I like to avoid surprises while I try to learn something new. ? 73, ? Rick ?
toggle quoted message
Show quoted text
From: FT-60@... [mailto:FT-60@...]
Sent: Sunday, June 22, 2014 9:18 AM
To: FT-60@...
Subject: Re: [FT-60] Memory Bank Recall Function? ? The "Memory Bank Recall" function works for me exactly as written in the manual. If you press and hold V/M in the manual's step 4, what you try to avoid in your step 4, you'll enter "Memory Bank Scan" mode (I guess the "b" is for "bank scan"). See page 39 (in my manual, anyway) for more info.
-Don, KE6DM
------
Sent from my HP Touchpad running Android Jellybean! On June 22, 2014 7:47:57 AM PDT, "'Rick - yahoo' rgsparber.ya@... [FT-60]" <FT-60@...> wrote: ? I have found that the Memory Bank Recall Function does not work exactly as described in my book. Here is what works for me: ? Memory Bank Recall ? 1.???? If necessary, press V/M to get into memory mode 2.???? Press and hold BAND until display shows BAND # where # is the band number and SEL is flashing; you can also select NO BANK to exit the Memory Banks 3.???? Rotate DIAL to select desired bank 4.???? Press V/M for about 1 second; if too long, you will see MBLSCN and band won¡¯t change. You will see ¡°b¡± on top of BANK on the left side of the display. Press BAND to clear the ¡°b¡± (what does the ¡°b¡± mean?) ? ? I would appreciate others testing this procedure to see if it works for them. ? 73, ? Rick KG7MQL
|
