开云体育

Vince The pin 5 voltage spec is around -150v. A source of Tx problems is often Q3 (2sc784R) at PB 1181B RF unit. The attached manual can help you, Good luck Emerson PP6EW Em qua., 6 de mar. de 2024

Hello, I am new to the FT-101 world and new to the group and new to radio repair in general (and to be clear, I’m NOT an 11meter operator). I recently got my hands on a beautiful old FT-101 EE. It

https://www.md0mdi.im/yaesu-ft-101-series-information-page/ best i can do.

Glad it worked out.? Thanks for the feedback. -- 73, KK7JNR

Hi Dan. I found out why the the reason that the receive isn't working. A suggestion from Alex N7SM at the winter field day. To check the headphone jack. Sure enough I jumped the pines on the back of

Hi Steve, I have the FT-101E but have never heard of the ES.? I checked online to see if any schematics were available but did not locate one.? I did find out the below information about it.?

Hi All. Re: I reasnly got a partly working Yeasu FT-101-ES. I got it asis from a pawn shop. The Pawn shop got the 101 in an estate sale. The 101 came Complete expect for no A/C or DC power cord. I got

Thanks for the info! I uploaded some pictures of the display unit and the restoration. I'm definitely need to find a FL-101 now! HI.... Erwin, PA3DAF

Erwin, I have one of these FR-101’s with the LED’s as well. I have never been able to find any documentation on the LED version either other than verifying these were part of the last production

Hello Erwin, I have an FR-101D, together with the matching hybrid transmitter, the FL-101. My FR-101D has the green display. I have the original manual for it. I bought the pair together with the

Hi, I’ve just checked my FR101D and it has a green display, I too have an FL101 and the FR101D, I also have a standard FR101 analogue display. The only thing I can’t find is the 5 pin plug for the

The red LED’S came out in the last runs of the FR-101 digital display models. 73 Roger VE7LB Sent: Thursday, January 11, 2024 1:42 PM To: [email protected] Subject: [Yaesu-FT-101] FR-101D

If you go onto the Fox Tango International website i think there are or maybe some info on there .There is alawys somebody on that site who will point you in the right direction . I also have the

I recently bought this FR-101D with LED display. It was very dirty inside and outside but with all filters, FM unit and a 2 meter converter. Last weeks I cleaned it thoroughly and everything seems to

Garden variety? Peter G0 LQU Eric W7EV wrote:

I'm assuming this radio has a garden variety changeover relay but wanted to check with those more experienced with the ZD.? Assuming the relay is the stock relay, are there any tricks I should be

Thanks again Peter. I'll look into those items. (when I next get the inclination!) Peter G0LQU Peter Roberts G4DJB wrote:

Okay Peter - that one sounds very much like a leaky C13. That capacitor couples the anode of the driver to the grids of the PA and is another of those known weak spots! I sounds as if your radio does

Hi Peter and many thanks for the additional advice. Actually I have decided to have a break from that radio - if anything there are other things not working - when I try to adjust the standing current

Hi Dan, Very good on the test bench set up. The dim bulb test should work fine. I don't have much in the way of test equipment ... a B&K isolation transformer, a digital 200MHz disk channel scope