开云体育

Hi Alistair, I forgot to turn off the "Chats" option in my settings screen. It's off now. It's just another messaging system similar to what we are using now except that users bypass any moderation

Both appreciating feedback and enjoying reading posts I would like to ask a few questions but thought these might be better under 'Chats' - but I cannot work out how to raise a 'chat' message.? Is

Before I go too far, look at this site for board recognition. You are looking for the RF unit, "front end" board that is to the right of the VFO as viewed from the top of the radio with the lid

Great. Thanks. —Kenoli

Yeah ... that is all the wrong part to be looking at. I’ll take the lid off one of mine and take A photo of it

Here are some photos.

Can you give me a better location description.? I have found the VFO circuit board (1056) inside the box that holds the main VFO adjustment capacitor but see no removable FETs anywhere in the area.?

If you smelled something, I would pull out the regulator board that is along side the RF power tube cage and inspect it for damage. The other one to look at would be the board underneath that has

Thanks so much for the suggestion.? Is there an easy way to test? the FET?? I will check it if I can, or just order a new one and see what happens.? Anything else I could easily check.? I thought

Yes. The older 101 radios used a lamp as a fuse from the antenna jack to the receiver stages. You still could just have a blown dual gate FET on the smaller board near the VFO. That FET is mounted in

No.? Is that the lamp next to the antenna connection? Does the lamp function as a fuse?? The lamp is not blown. Or...can you tell me where it is? Thanks, --Kenoli

The following files have been updated in the Files area of the [email protected] group. * /07 - FT-101ZD Files/Yaesu FT-101ZD Mark 0 - Brochure (American).pdf (

The following files have been uploaded to the Files area of the [email protected] group. * /07 - FT-101ZD Files/Yaesu FT-101ZD Mark 0 - Brochure (American).pdf (

Did you also check the antenna overload fuse?

I have an FT-101 that I used back in the 70s.? I was trying it out today with a long wire antenna.? I fired it up, tuned it in, everything went fine.? Then I moved it from one surface to another

Roger – the page individual facings are 258mm x 182mm Regret my skills are insufficient to do stuff like stitching together scans. The page content made it difficult to get the final jpgs anything

Hi Alistair, Thanks for all of the brochure scans and uploads. Just wondering what is the actual size of one of the 4 page photos? That would be a help in putting all the single pages together into a

The following files have been uploaded to the Files area of the [email protected] group. * /07 - FT-101ZD Files/FT101Z page 20003M.jpg ( /g/Yaesu-FT-101/files/07 - FT-101ZD

Yes later today or maybe tomorrow as I will need to fit scan time with other work.? As I guess you will know the brochure is a fold-up of a large single sheet so you will have to stitch the various

Are that's much better, thanks for that, Is there any chance that you can upload the rest of the pages please? James MD0MDI