Dear Friends!
?
RX:
I have a Sommerkamp FT277ZD MK3, it is the same transceiver like Yaesu FT101ZD MK3
?
The marker signal is on 1800kHz only S2, but on 1825kHz is S9, on 1850kHz only S2, on 1875kHz is S9, why is so big difference?
Is it problem? Other bands the marker signal is about S9. Marker signal level is not good or my transceiver rx is not good on 160m?
?
On 160m I hear the station well if the antenna is on the radio but the noise level is now only S3 on my Sommerkamp FT277ZD and the beacon on 1850kHz is S4, on my IC751A? the noise level is S8 and beacon is S9, other bands the two transceiver has the same noise level
?
TX:
On 160m and 10m no power output, other bands is ok 100W.
On 160m and 10m if I rotate VOX GAIN to MOX the Ic is 50mA, it is ok.
But If try to increase the drive level clockwise the Ic is the same, not more, if I rotate the PRESELECTOR it does not matter, no power.
Can you help me?
?
I have only multimeter and Diamond SX-100 power/SWR meter. I have an oscilloscope also, but not using it.
?
Thanks: Laszlo? ha5bzr
