¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Re: A 3D printed FRG-7 light and power switch knob
Wow, tremendous job!!
By Randy K7RAN · #157 ·
Re: A 3D printed FRG-7 light and power switch knob
Looks great Lex. Best wishes Phil https://thepeppermintloungedarwin.blogspot.com/ Sent with [ProtonMail](https://protonmail.com/) Secure Email.
By Phil Brennan · #156 ·
A 3D printed FRG-7 light and power switch knob
Hello all, "The switch knob is gone, long life the switch knob." Got a new Frog in the workbench in a fare condition, but needed a lot of cleaning (dust and other unidentified stuff and gore) and
By Lex PH2LB · #155 ·
Re: Antenna - need some advice please
Hi fellows thanks for the help , I like the W6LVP but the price is a bit high at $295.00 for the unit and $100.00 shipping , I live in Canada in Ontario and would have to check the cost for
By Rick · #154 ·
Re: Antenna - need some advice please
I've tried several loops that really helped drop the noise floor but varied widely in sensitivity.? My favorite is the W6LVP active loop.? It has a low noise preamplifier on the loop powered by an
By Russ Norwood · #153 ·
Re: Antenna - need some advice please
Hello Rick A few questions there.? Mini Kits does offer the option of having some of their products pre-assembled.? I am not sure if that is the case for the loop antenna module, but it may be
By Phil Brennan · #152 ·
Re: Antenna - need some advice please
Hello Rubbersoul , if I buy the already assembled unit in an enclosed box I think I have to buy a loop antenna and coax cable for the unit ,I think , or could I just hook the unit to my long wire
By Rick · #151 ·
Re: Digital frequency readout for a FRG-7
Looks great. Thanks for posting. 73 Phil Sent from ProtonMail mobile
By Phil Brennan · #150 ·
Re: Digital frequency readout for a FRG-7
Hello Fellows , here is the website for the DD-103 unit , all I had to do was put on the two alligator clips , the fellow sent it to me set up for the FRG-7 , just put the black clip on the ground
By Rick · #149 ·
Re: Digital frequency readout for a FRG-7
Rick, does the unit display the MHz, as well as the KHz? Any photos of installation??? Thanks? Bob On Sat, Feb 5, 2022 at 12:52 PM, Rick<rdelaplante@...> wrote: Hello fellows ,just
By Robert O'donnell · #148 ·
Re: Digital frequency readout for a FRG-7
Thanks for your information, Rick. This is the best kind of review to get. 73,Curt W4CP
By Curt Phillips W4CP · #147 ·
Re: Digital frequency readout for a FRG-7
Sounds great. Do you have a photo of it in action? Sent from ProtonMail mobile
By Phil Brennan · #146 ·
Re: Antenna - need some advice please
Consider a loop antenna from Mini Kits in Australia. https://www.minikits.com.au/EME234-HF-Active-Loop They are low noise, reasonable in cost and work well. Some soldering required. Good luck Sent
By Phil Brennan · #145 ·
Re: Digital frequency readout for a FRG-7
Hello fellows ,just thought I would tell you , my Daughter got me a DD-103 universal Digital dial ,it is easy to hook up comes with the clips and wire and is set up for the FRG-7, just hook one clip
By Rick · #144 ·
Antenna - need some advice please
* *
By Rick · #143 ·
Re: Issue with Bands
I cleaned the switch 3 times as I suspected the same. Andrew
By KB2LMN <acurlik@...> · #142 ·
Re: Issue with Bands
are you sure its not just a dirty band switch? ________________________________ Sent: Wednesday, January 12, 2022 10:57 AM To: [email protected] <[email protected]> Subject: [Yaesu-FRG-7]
By KA2ING · #141 ·
Issue with Bands
When I put a signal on the antenna I¡¯m able to tune in on the D & C bands but on A & B bands I can¡¯t find any signal. I do hear a tone but it¡¯s internal if I kill the signal gen it¡¯s still
By KB2LMN <acurlik@...> · #140 ·
Re: Dial Triangles
there radios are great receivers for AM shortwave and AM MW. a bit wide for ham radio SSB but still works if the bans are not to crowded ________________________________ Sent: Saturday, December 25,
By KA2ING · #139 ·
Re: Dial Triangles
Thanks ... I think my marks are bang on, so probably no need to do that.
By Julian Bunn · #138 ·