开云体育

Hi Donald. Thank you for your reply and idea. I will do that. Best regards. Joao CT2HZF ?s 21:57 de 14/01/2023, Donald Hellen escreveu:

Joao . . . You might also post this in the amateur-repairs and the Fox Tango groups to have more eyes on your request. We're a pretty small group here. Donald

Dear All. I have bought one Yaesu FT707 with external FV707DM, but unfortunately the external VFO has a problem. The thing is, as soon as i press RX buttom, the frequency readout on FT707, jumps to

Quad Band Transceiver, Power Supply, Crystal filters, Manuals, and more For Sale: . Yaesu FT-8900 Quad Bander: The Yaesu FT-8900R quad bander gives you power and flexibility on the road. Operate

are these dynamic or electret? types? TIA 73

Follow the previous advice and protect your radios by shutting the one currently not being used for transmitting off. [email protected]> wrote:

Thank you all for your replies. I think my safest bet is to have one radio completely shutdown while using the other Brian

wrote: I missed that these are on completely different bands, but I would still be concerned about overloading the input of the unused radio, even when the frequencies are so far apart. Donald

On" As using the same power supply? I would expect you are using separate antennas since one is a VHF/UHF and the other an HF rig.... I have had my FTM400 turned on alongside an Icom HF rig without

Brian . . . <brianhowe14@...> wrote: You're asking for trouble with the two antennas so close in proximity to one another if you don't take some action to isolate them or otherwise

Thank you for your quick reply. The DX10 is on a 35’ end fed and the other is a diamond 50X antenna. They are both in my attic.

As long as they are using different antennas and the transmitter of one radio is not on the same frequency as the other radio in receive, should be no problem. Art Gribensk [email protected]>

I don't know about these radio's but anytime you have a transmitter going you don't want any other radios hooked up to the same antenna (with a couple of exceptions) . Also your receiver on a close

Good morning, I have a FTDX 10 and FTM400. Is it ok to have both radios on at the same time? ?Then with both radios on, will transmitting on one damage the other? Thank you, Brian K0BWH, 73

there it is...FP707...the memory is better than I thought

Quad Band Transceiver, Power Supply, Crystal filters, Manuals, and more For Sale: . Yaesu FT-8900 Quad Bander: The Yaesu FT-8900R quad bander gives you power and flexibility on the road. Operate

40 meters should be good for most digital work. As for the radio-specific interface needed, you might also try the Fox Tango group, which has a lot more members.

Tnx Donald,? he is not new to radio and has been idle for a while, but has asked for help,in getting into digital modes!!?He has asked about it and i will endeavor to get him up and

Tyrone . . . <tyke1954@...> wrote: I don't believe there is any software that covers ALL of the digital modes. You didn't say if the software needed to be free or not. Ham Radio

A friend is wanting to try the digital modes on his FT-2000D. any recommendations of which interfaces work best with Yaesu FT-2000D. He has the optional DMU-2000 with it. Also which software covers