开云体育

Has anyone successfully got the rigpi/ftdx5000mp to operate over the internet ?? Also need to control 2 g1000 rotors.? Any info will be help full .? ?K0BBB duane

Marc . . . Try also posting this in the Fox Tango group and the amateur-repairs group. One of these should get you your answer if this one does not. Our group here is still small and new. Donald

I wonder if any of you Yaesu exerts know of a work around for the usually very expensive AM filter in the FT107m. Drake had a resistor across the filter pins as a cheap

I have a recently acquired FT-107m that works amazingly well, except the power out on 80m is a bit low. All other bands are 100w or better (10m slightly less). All tested into a 50 ohm dummy load. My

Yaesu HF Transceiver, Power Supply, DTMF Hand Microphone, and more For Sale: . Yaesu FT-840 HF Transceiver: The compact Yaesu FT-840 has two direct digital synthesizers and rotary encoder

I finally figured it out after studying the schematic for the power supply and the rig. Looks like pins 1&3 are connected when using the internal ac supply.

Hi vy nice in RIGS FT-857 / 897 the CW Tuning LED (goes to blue if QRG matches) I enjoi this really. This I am vy missing in FT-818 Now sometimes use the Wolfwave or a DIY Audio Filter - but then

Mark . . . Perhaps someone in the other groups I linked to can help. Donald KX8K ---------------------------------------------------- Some ham radio groups you may be interested

I have the manual. It just doesn't discuss how this plug is wired. I suspect it's pretty simple, because there is only a plus and minus contacts. Thanks for the other suggestions.

Marc . . . For things like this, I like to increase my chances of getting the information I need by posting in other relevant groups, too. These would seem to be other good places to join and

Does anyone know the wiring scheme for the Yaesu FT107 dummy plug? This is the plug that is inserted in the DC power socket when the AC supply is to be used. I couldn't find anything online with

Yaesu HF Transceiver, Desk Microphone, and Power Supply For Sale: . Yaesu FT-840 HF Transceiver: The compact Yaesu FT-840 has two direct digital synthesizers and rotary encoder that provide

someone know what the type /size of the batteries in the fnb31 38, etc are ?? the john dutton46@...

Two Yaesu HF Transceivers For Sale: . Yaesu FT-767GX HF rig: The Yaesu FT-767GX is a 100 watt top of the line HF transceiver covering 160-10 meters plus 100 kHz to 30000 kHz. It even includes a

Yaesu HF Transceiver, 2 m Transceiver, Power Supply, Mic, and more For Sale: . Yaesu FT-840 HF Transceiver For Sale: The compact Yaesu FT-840 has two direct digital synthesizers and rotary encoder

Yaesu HF Transceiver, 2 m Transceiver, TenTec Desk Mic (also fits Yaesu), Filter, Power Supply and more For Sale: . Yaesu FT-840 HF Transceiver For Sale: The compact Yaesu FT-840 has two

This is the one I was thinking of: https://foxtango.groups.io/g/main The others are specific to certain models. I picked up an TF-767GX for $50 and got it working except for the tuner and memory

Give me a moment and I'll find the ones I belong to. They're not my groups but I certainly don't mind recommending them. I'll get back to you. wrote:

Hi Donald Thank you for your return mail Being manly into microwave and test equipment But as my firs rig was a Yaesu I wanted to join Yaesu group I did not realise there are a number of other