开云体育

If you don't know what you're doing, you likely have none of the tools required to do the job right. Send it to a professional, rather than destroy it, blindly trying to repair it. Gary

The dummy load for the NanoVNA is only good for a fraction of a watt, so that won't work. You may need to find a suitable dummy load that can handle 100 or 200 watts for testing a typical amateur

This is the FT710, a current radio.? doesn't use the 6JS6C tubes, that was the FT101. 73 John AF5CC Sent using {0} ---- On Tue, 08 Apr 2025 20:18:38 -0500 Stiv Ostenberg <stiv@...>

Was hoping for more detailed instructions, or a video. I don’t know what I am doing, don’t have a 50ohm load (unless one of the giblets with the NanoVNA is one). Sent: Tuesday, April 8, 2025

not sure of what it uses for finals, but unplug set, ground caps, and replace.? if it uses 6js6c tubes, you will want the green strippe tubes. but set your rig meter ic current through tubes and

Howdy; have an FT-710 I bought as a new ham, and am concerned I may have toasted the Finals working FT8 at 100 watts. Is there any documentation on replacing the suckers?

Hi Ron, I am not sure there is a printed list anywhere that has the correspondence between the setting in the menu and the WPM. I used to keep it set around 48 to 50 which seemed to be around

Any FT-100D owners out there that can help me with understanding the CW speed setting numbers in this radio? ?I have played with all sorts of possible coorelations but have yet to find one that

MONTHLY REMINDER--Our Amateur Radio Groups Below are our amateur radio related groups. Some may be new enough there are only a few members. If one of those interests you, join it and give it some

Here is an example of a battery eliminator. (

Yaesu FT-2000 Deluxe HF Transceiver, Power Supplies, Crystal filters For Sale: . Yaesu FT-2000 Deluxe HF Transceiver: The Yaesu FT-2000 follows in the tradition of venerable FT-1000 series, and

Sorry, I don’t understand what you are asking. By “battery eliminator” do you mean a way to power the radio without a battery? I thought the power cord could plug into the radio directly, but

Hi! Does anyone know if Yaesu makes a battery eliminator or clamshell for the FT-65R? If not, has anyone successfully used an aftermarket option (or is that not advised)? Thank you, Lynne KR4BMV

I have a Westmountain Radio Rigblaster Plus soundcard interface to do digital modes from your computer with your rig. Great for FT8/FT4, PSK31, and other soundcard modes. It comes with the the usual

I have for sale a Yaesu FT5100 dualband FM radio. Does 50 watts on 2m and 35 watts on 70cm. It also does dual receive so you can listen to 2 bands, or 2 frequencies in the same band, at the same time.

I have for sale the original operating manual for the Yaesu FT890 HF transceiver. In good condition overall, and contains schematics for the radio as well. Asking $13 shipped by media mail. I can take

I have for sale a Yaesu FT100 HF/VHF/UHF all mode transceiver. This is the mobile sized radio which does 100 watts on HF and 6 meters, 50 watts on 2m, and 20 watts on 70cm. Full of plenty of other

Yaesu FT-2000 Deluxe HF Transceiver, Power Supply, Crystal filters For Sale: . Yaesu FT-2000 Deluxe HF Transceiver: The Yaesu FT-2000 follows in the tradition of venerable FT-1000 series, and

For those of you who like to collect and use the older Yaesu rigs, I have for sale from a local estate a Yaesu FT480 2 meter all mode radio.? It comes in the original box with the stryofoam inserts,

I have for sale 2 items for Yaesu rigs like the FT450/950/2000? ( and a few other radios). 1. 4 pin power cord used in most modern HF radios. 6 feet long, spade type fuses in both lines. Each line