开云体育

Update... The FNB-41xh 9.6 volt 1200mAh battery charged to 12.33 volts overnight. The radio will not power on, so something else is wrong. Thanks for all the info, guys. -- Rick, KK4GGL

Donald, Thanks for the info. -- Rick, KK4GGL

Rick . . . Have someone help you with this, but set a power supply to the same voltage as the battery pack, and hook up some wires (color coded is helpful). Make sure of the polarity, and have the

Donald, I haven't been able to find if the radio to find if the radio can be run on the charger without the battery in the manual. Of course, I could be missing it. I have been to that link. I'm not

Let's see the rig.

Rick . . . (see below) I would expect that on older radios. Does the operating manual say it's able to run while being plugged into the charger? I would go with what the manual says. In lieu of

I have acquired an FT-80r. The battery (FNB-41xh Ni_MH)is dead (measured with a multi-meter). The charger that came with it is an NC-60B (for Ni-CD). The charger tested as putting out the specified

for what its worth,i have a yaesu ft-707 but i have always regarded yaesu being like chinese radios without the qc!,not a fan,seems they are built too much to a price point!.

I had a similar problem with the 710 that I got used.? It had a very early version of firmware (like 1.01 for everything).? The fix for your issue is to completely turn the radio off after the

I recently picked up a DMU-2000 to go along with my FT-2000D.? When I connected it, I found that the 2023 CMOS battery was completely dead which cleared any BIOS settings in the DMU.? I replaced the

I bought the product 1 month ago, I installed a software update on the device and when I turned it back on, the device said that I had to reinstall it, I reinstalled it, but it keeps me in the same

Also check with the WIREMAN.com Also search Make and model of the Radio on GOOGLE or BING, you may find supplies for that specific Radio. Again, GOOD LUCK

Hi Mike, I have the Yaesu part number but there is no info on it but I am sure it is a straight through pin out. Thanks Adam W4AJF

Adam, first check the Yaesu for a part number, then thick with I think it’s called CABLESAREUS.com Good luck,Mike KM4FWT P.S. I’ll do some more research, I might be wrong about the name of

Hi all, new to the group. I have a Yaesu FIF-232C but it came without the 6 pin to 6 pin DIN cable so I will buy one, can anyone confirm that it is in fact pin to pin straight through wiring? Thanks

Hi all, new to the group. Can anyone tell me in the 6 pin Din to 6 pin Din cable for the Yaesu FIF-232C is pin to pin? I am looking to by a couple of them. Thanks for any help. Adam Farber W4AJF

2 meter Transceiver, Power Supply, Crystal filters, Manuals, and more For Sale: . Yaesu FT-1900, 55 Watt 2 m transceiver: The Yaesu FT-1900R provides toughness in a high performance 55 watt

Hi, Has anybody got a FRG8800 Display unit For sale as mine has been damaged in transit and has Gone black because it got cracked. Thanks for your time reading this post. Regards:-Ian

I am trying to help another ham friend out.? He has a FT-4700H that won't cover all the US frequencies.? There is a post in the cloud for doing the modification, but it is unclear as to what you

For advice.... Thanks