开云体育

Iain, Heh, I wasn't really asking for advice on the track plan, just checking on how to wire up the reversing loops especially in the Digikeijs/YaMoRC world. This track plan is verson 60, so it's been

Don’t recall that being mentioned, looks like you are into five modules then - are redesigning the track to make one feasible - unfortunately the r are only seeing little snippets which prevent us

As I mentioned, there isn't room to do that. I know it's the conventional solution but can't do it here.

Slide the turnout circled in blue to the right, this extending the line marked purple and make that the auto-reversing section ? Sent: 01 April 2023 06:37 To: [email protected] Subject:

Iain, Yes. You've answered the question. I will gap it for the extra sections and see what I can get working. Length of the loop isn't an issue for me. In the unlikely case that the preferred

Any estimation as to a date for an update to the YD9401 software in order to have a working WiThrotte ? Richard Edited on Tuesday, 28 March 2023 at 17:52 (GMT + 2) à Paris, France; sent later.

It is unfortunately still rather difficult to read the diagram, mainly due to the colours in use, but also the resolution however I have marked what I consider is the reverse loop. You can

Thanks Iain, as I thought really. I had a question buried in the bottom of the post about adding tracks inside the loop whilst still using all the RD5013 features. This revision is a hybrid of the

I think that the loop you refer to is the inner track on the left-hand side of the upper diagram (I cannot read the track name due to the colour and size) . Assuming it is a DR5013 will handle that

I have 3 different places on my layout where I need reversing loops. Here is one of them. Here is a copy/paste from the 3rdPlanit software of my original main yard design. Green are double gaps,

That your turnout has internal Frog-polarization. Very probably through the Point-Rails. That‘s why while switching the Short occured: two captains on one ship ;)

Awesome Karst. Thank you.? I removed the wire and it switches fine, no short or reverse indicator. Turnout operates as expected. What does this mean?

Very quick reply, since Ibam on my phone ;) Q: what happens if you disconnect the blue ?frog-wire“ from the MP ? And then throw and close the swtches like you described before ?

Thank you Karst, much appreciated. I have verified all the wiring and include the following diagram to show all wiring between each component and the 4 track pieces which are all fully isolated on

We will be represented by our dealer: N-Spoor-Store Freebit.

Will YaMoRC be at the Intermodellbau in Dortmund next month?

Hi PJ, It seems to me, there is something wrong with either your turnout and/or it's wiring.. Since you are not using the YD7100's output, we can rule that out. Interesting is however, that the

I have #YD7001 connected to #DR5033 via LocoNet B, DR5033 connected via Track Output to #DR5088RC to Rails. K=Outer Rail, J=Inner Rail. The YD7001 track Output is only connected to the YD8116 Track

Andris, I don't think that DCC should be done entirely as a low-bid contract, but if that's the only metric you're looking at Digitrax just dominates almost everything else. If anything, the smaller

Well, making the DR5033 autoreverse was one of my biggest mistakes. It not only caused/causes quite some problems with customers who do not really understand reverse-loops. But also one does not