开云体育

Yes, the DR4088LN does not have a strong 5V supply. the YD6016 needs a bit more current and a stable 5V. which is best as close to the 4088LN as possible.

Ok, will do. ?Ca you explain the logic behind that please? ?Is it because the ‘master’ is Digikeijs?

Yep, that allright ?? you might want to swap the most right 6016 with the 4088, in such a way, that 4088 is on the end of the chain

Thanks Karst, is this correct? I forgot about the rules of in/out connections when daisy chaining! Paul

Nope, won’t work this way. You connected the cable between 4088 and 6016 on both ends to s88-IN. you’d better make your schematic better, by rotating both YD6016ES by 180

Hi all, ?I just wanted to check that my understanding of how to correctly connect two YD6016ES units to a DR4088LN with a DR4088/S88N with the two YD6016ES units having power provided from a DR5033

After quite some deliberation, we finally decided to bring the RBus feedback module Design is done, prototype ordering and testing is next. It'll be the

Your understanding is 100% correct Alan (y) Greets, Karst

My understanding is that the YD8116 can be used 'as is' for 8 motors (not solenoid) or 8 two aspect signals, with the option to select the start accessory address with the programming button (then all

Is anyone else out there just as confused as I am? What I'd really like to know is how all these products connect together because there seems to be lots of YaMoRc products to do lots of things! At

Understood. So you have created a ES/IO – LINK via the various devices and then can configure your YD8116 that way. But a stand-alone YD8116 requires a bit more HW to get connected.

Sorry Alain, yes there was some confusion between the two forums - the other forum has now incorporated YaMoRC with the existing info around Digikeijs so it isn't lost- it is the primary connection

I'm also a member of both forums since I have both products. It's more then a bit confusing to have the two forums; it almost seems as though there is a competition between the two. There are now

I'm already a member. A bit confusing to have two forums as this one still seem active (and not merged or closed) There is no built-in USB connector on the YD8116. So I guess you assume that I have

Hi Alain, you may wish to join the merged Digikeijs & YaMoRC forum at /g/Digikeijs Secondly, you don’t configure the YD8116 via the YD7001. You ensure power is disconnected/off to

HI All, I've just upgraded my DR5000 with upgrade module YD9401, so now I have an YD7001. Is there a way to configure the YD8116 (and other modules) with the YD7001, other than setting the first

They are there :) at the product detail, under the service tab.

Thanks. I didn't see any links on the website for manuals.

Hi, In all our Manuals: http://www.yamorc.de/downloads/YD6016ES-CS.en.pdf ( http://www.yamorc.de/downloads/YD6016ES-CS.de.pdf ) page 3. Greets, Karst

Hi, I am planning my physical connections to the layout and would like to know the dimensions of the?YD6016LN-RC LN Railcom feedback module. According to the website it's? not going to be available