开云体育

Sorry about that. I edited my post to remove my comment about the booster as a viable reverse loop switch. I've got a Digitrax DR5013 on order to test it out with the DR5033 booster. There are still

Alex, cost per amp for a system's booster is an interesting metric but when I did my cost comparison for the club my goal was a low total cost of the "whole" package at the time.? In our case the

Nice mood ;) It will as soon we are really starting with supplying at Ryan's :) Maybe it sounds a bit weird, but without any announcement people already are able to find all the preparations we are

Well, making the DR5033 autoreverse was one of my biggest mistakes. It not only caused/causes quite some problems with customers who do not really understand reverse-loops. But also one does not

Andris, I don't think that DCC should be done entirely as a low-bid contract, but if that's the only metric you're looking at Digitrax just dominates almost everything else. If anything, the smaller

I have #YD7001 connected to #DR5033 via LocoNet B, DR5033 connected via Track Output to #DR5088RC to Rails. K=Outer Rail, J=Inner Rail. The YD7001 track Output is only connected to the YD8116 Track

Hi PJ, It seems to me, there is something wrong with either your turnout and/or it's wiring.. Since you are not using the YD7100's output, we can rule that out. Interesting is however, that the

Will YaMoRC be at the Intermodellbau in Dortmund next month?

We will be represented by our dealer: N-Spoor-Store Freebit.

Thank you Karst, much appreciated. I have verified all the wiring and include the following diagram to show all wiring between each component and the 4 track pieces which are all fully isolated on

Very quick reply, since Ibam on my phone ;) Q: what happens if you disconnect the blue ?frog-wire“ from the MP ? And then throw and close the swtches like you described before ?

Awesome Karst. Thank you.? I removed the wire and it switches fine, no short or reverse indicator. Turnout operates as expected. What does this mean?

That your turnout has internal Frog-polarization. Very probably through the Point-Rails. That‘s why while switching the Short occured: two captains on one ship ;)

I have 3 different places on my layout where I need reversing loops. Here is one of them. Here is a copy/paste from the 3rdPlanit software of my original main yard design. Green are double gaps,

I think that the loop you refer to is the inner track on the left-hand side of the upper diagram (I cannot read the track name due to the colour and size) . Assuming it is a DR5013 will handle that

Thanks Iain, as I thought really. I had a question buried in the bottom of the post about adding tracks inside the loop whilst still using all the RD5013 features. This revision is a hybrid of the

It is unfortunately still rather difficult to read the diagram, mainly due to the colours in use, but also the resolution however I have marked what I consider is the reverse loop. You can

Any estimation as to a date for an update to the YD9401 software in order to have a working WiThrotte ? Richard Edited on Tuesday, 28 March 2023 at 17:52 (GMT + 2) à Paris, France; sent later.

Iain, Yes. You've answered the question. I will gap it for the extra sections and see what I can get working. Length of the loop isn't an issue for me. In the unlikely case that the preferred

Slide the turnout circled in blue to the right, this extending the line marked purple and make that the auto-reversing section ? Sent: 01 April 2023 06:37 To: [email protected] Subject: