Hello Dear Fans?
?
The new firmware for YD7001 and YD9401 is ready.
?
You are welcome to download it from: http://www.yamorc.de/downloads/YD_7001-build-55.exe?
(manually copy the link text into your browser if the link does not work )
?
To the following procedure:
?
1. download
2. install (using Next, Next, Finish), if you have already done so you can skip the drivers.
3. update the YD7001's firmware
4. reboot the YD7001 cold after updating (switch off, switch on after 15 sec).
Wait until the LED of the YD9401 flashes. 6.
Open the WLAN mask and update the firmware + SPIFFS (check the box!).
7. the YD9401 is now set to the new factory settings, repeat the settings as you did after installing the YD9401.
After updating, restart the YD7001 cold (switch off, switch on after 15 seconds).
?
And then you are ready to go?
?
So what did you get ?
?
1. the 192.168.4.1 bug fixed
2. full WiThrottle protocol (tested with WiThrottle (iPhone), Engine Driver (Android), TCS hand controller and wiFred).
3. some minor stability improvements in the Z21 protocol, programming track.
4. some cosmetic improvements in the speed controller and LocoNet feedback monitor.
5. protection against unwanted inputs when YD9401 is (re)starting.
6. some sound signals in various screens to indicate when e.g. firmware updates are ready or when the YD9401 is on-line again.
7. quite a few more, rather invisible, unnoticeable IT improvements in the GUI.
?
So. you are cordially invited to try it out !
?
Greetings,
Karst
karst.drenth