Re: YD9401 and Digitrax Simplex
|
Karst,
That sounds promising! The Baud Rate setting Ryan had me change on the DR5000 is LocoNet tab>Settings and I set the Baud Rate to 800, then the Simplex throttles worked fine. The change was available in late 2021, I believe I am the first person to test all of the DT100R, DT300R, DT400R, DT402R, and UT4R with the DR5000.
So it sounds like the YD9401 should work with Simplex throttles with that same adjustment?
Thanks, Alex
Ah,
?
In that way :)
?
Do you mean the Baudrate-Tune option ?
That one I implemented already back in V1.4.2....
And I did it again in the YD7100 Firmware ( ported ==> YD7001 ) because not only UR91 suffer from this problem, also some old Fremo FRED controller do ;)?
?
So if @Ryan meant that Tuning option ? it's also there and will also work the same way.
And... if it doesn't I guess Rayan will be more than willing to share the sollution with me ;)
?
Greets,
Karst
-- Alexander Wood Hartford-New Haven, CT Modeling the modern era freelanced G&W Connecticut Northern in HO Digikeijs DR5000 - JMRI - ProtoThrottle - TCS UWT-100 - TCS UWT-50p - Digitrax Simplex
|
