My apologies if this has already been answered.
I have several YD7403 boosters connected via Loconet B to my YD7001 Command Station.
They work fine but I would prefer a short circuit somewhere on a track to only shut off the booster with the fault. As it is now, all boosters shut off and all tracks are powered off.
I also use YD8116s to operate my switch machines. They receive their commands from the track, and so when the boosters have shut down the tracks I also lose the ability to change any turnouts until I clear the short.
?
So the question is: is there a config somewhere that will allow the layout to power up with all boosters active BUT NOT shut off all boosters when there is a short.
?
Oldngrey