Re: YD7432 Reverser - recommended length of the Sensor track
|
You ask whether the YD7432 will work when “connected via S88 for occupancy monitoring” – the YD7432 uses LocoNet to provide the occupancy reporting, not S88 ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of TrainZeal via groups.io
Sent: 08 January 2025 01:59
To: [email protected]
Subject: Re: YD7432 Reverser - recommended length of the Sensor track? Could you please elaborate why it matters to have "sections adjacent to S1 and S2 to also be supplied with a current sensor" ? In a reversing loop, sections S1 and S2 are usually next to the turnout, which is not necessarily supplied from a detector (as it is not part of "monitored track", at least in TrainController). I am currently using Litffinski reverse loop modules in combination with ESU 50094 detectors. In this case: S1/S2 sensor tracks are short (5-20 cm) and not monitored, only the loop between them. I am considering your YD7432 Reverser modules for my additional loops. Do you think they will work with ESU ECoS when connected via S88 for occupancy monitoring?
|
