开云体育

Hello John

It sounds like the H bridge has broken. You should speak to Digikeijs and make a ticket and send back to them for repair. This there policy for returns. They will fix and send direct back to you.

James

On Mon, 11 May 2020 at 09:13, j.pollard4 via <j.pollard4=[email protected]> wrote:

Hi Dennis,

yes, checked with 5033 disconnected completely.

I think the 5033 is faulty as it now outputs zero volts to the rack.

Regards,

John

------ Original Message ------

From: "Dennis Cherry" <dbcherry@...>

To: [email protected]

Sent: 10/05/2020 13:45:52

Subject: Re: [Digikeijs EN] DR5033 track voltage

Have you disconnected the DR5033 output and checked if the Booster now operates correctly?

I remember a post somewhere that a person had a problem with a certain Power district module and it was in the settings between the two units.

I will check to see where this was posted and see if this is your issue also.

Dennis

--

Many Thanks

James Hudson

DCC Train Automation

james@...