Hi all.
?
I am experiencing false triggering of inputs from section tracks furthest from a DR4088 which I suspect is caused by using long lengths of parallel cables using figure 8 wire as Kato Connectors:
?
In some cases I have 3 connected in series making cables 2.5m long.
?
Is there any way that the input of DR4088 can be desensitised so that it triggers at a greater current draw that the 2mA that is stated in the manual?
?
I do not have an Rrampmeter to determine if any current is drawn in an unoccupied state.
?
If I cannot then I will need to split the cables down the centre or add a new DR4088 closer to the offending lengths of track.
?
Those connections with only single length of cable are fine.
?
Many thanks
?
Colin
