开云体育

X-Air Ultralight Aircraft Ottoman Fuse sails

Seamus O'Donnell All Messages By This Member #11918 ? sometimes you need to just hold things in place with plastic clamps or maybe temp cable tie in place to stop moving. also first job is to velcro it around the vertical finn tube ? I have posted below the instructions from my build manual it might help ? Seamus ? Drape the cover over the fuselage, join it up at the back first with the Velcro after passing the rudder cables and elevator fork/trim cables through the holes.? ? Fit the support battens 330307A,B, C & D into place, 330307B doesn’t fit into a pocket it locates on the side brackets see B16D.? 330307C locates into a little pocket and then hooks into an attachment at the fin LE see B16C. ? Start to loosely lace the sides and top of the cover in a zig zag formation, but do not tighten, you may also use cable ties for this if preferred.? Attach tube 324 (shown in B16). ? Lace up the bottom of the cover starting at the back, working your way forward, time will need to spent on this to get it nice and tight. ? Continue lacing up the sides and top until the fabric is tight.? You will find that after a few days further tightening can be achieved. ? ? ? ? toggle quoted message Show quoted text ----- Original Message ----- From: wannagoflying@... [X-Air_Ultralight_Aircraft] To: X-Air_Ultralight_Aircraft@... Sent: Wednesday, July 27, 2016 2:12 AM Subject: X-Air Ultralight Aircraft Ottoman Fuse sails ? Still struggling on the fuse sails.. When we get one end or side lined up the other is off. Then I can't seem to pull the bottom together . Never been so frustrated . I have pics but I'm not sure how to put them on here. Is there aomething were missing her or were the sails just poorly made?
Seamus O'Donnell All Messages By This Member #11919 ? sorry just realised what is Ottoman ? ? ? toggle quoted message Show quoted text ----- Original Message ----- From: 'Seamus O'Donnell' etronics@... [X-Air_Ultralight_Aircraft] To: X-Air_Ultralight_Aircraft@... Sent: Wednesday, July 27, 2016 10:35 AM Subject: Re: X-Air Ultralight Aircraft Ottoman Fuse sails ? ? sometimes you need to just hold things in place with plastic clamps or maybe temp cable tie in place to stop moving. also first job is to velcro it around the vertical finn tube ? I have posted below the instructions from my build manual it might help ? Seamus ? Drape the cover over the fuselage, join it up at the back first with the Velcro after passing the rudder cables and elevator fork/trim cables through the holes.? ? Fit the support battens 330307A,B, C & D into place, 330307B doesn’t fit into a pocket it locates on the side brackets see B16D.? 330307C locates into a little pocket and then hooks into an attachment at the fin LE see B16C. Start to loosely lace the sides and top of the cover in a zig zag formation, but do not tighten, you may also use cable ties for this if preferred.? Attach tube 324 (shown in B16). ? Lace up the bottom of the cover starting at the back, working your way forward, time will need to spent on this to get it nice and tight. Continue lacing up the sides and top until the fabric is tight.? You will find that after a few days further tightening can be achieved. ? ? ? ? ----- Original Message ----- From: wannagoflying@... [X-Air_Ultralight_Aircraft] To: X-Air_Ultralight_Aircraft@... Sent: Wednesday, July 27, 2016 2:12 AM Subject: X-Air Ultralight Aircraft Ottoman Fuse sails ? Still struggling on the fuse sails.. When we get one end or side lined up the other is off. Then I can't seem to pull the bottom together . Never been so frustrated . I have pics but I'm not sure how to put them on here. Is there aomething were missing her or were the sails just poorly made?
wannagoflying #11920 开云体育 No problem that was just spell check it was supposed to say haunaman "Smart enough to fly crazy enough to love it" toggle quoted message Show quoted text -------- Original message -------- From: "'Seamus O'Donnell' etronics@... [X-Air_Ultralight_Aircraft]" <X-Air_Ultralight_Aircraft@...> Date: 2016-07-27 7:04 AM (GMT-04:00) To: X-Air_Ultralight_Aircraft@... Subject: Re: X-Air Ultralight Aircraft Ottoman Fuse sails ? ? sorry just realised what is Ottoman ? ? ? ----- Original Message ----- From: 'Seamus O'Donnell' etronics@... [X-Air_Ultralight_Aircraft] To: X-Air_Ultralight_Aircraft@... Sent: Wednesday, July 27, 2016 10:35 AM Subject: Re: X-Air Ultralight Aircraft Ottoman Fuse sails ? ? sometimes you need to just hold things in place with plastic clamps or maybe temp cable tie in place to stop moving. also first job is to velcro it around the vertical finn tube ? I have posted below the instructions from my build manual it might help ? Seamus ? Drape the cover over the fuselage, join it up at the back first with the Velcro after passing the rudder cables and elevator fork/trim cables through the holes.? ? Fit the support battens 330307A,B, C & D into place, 330307B doesn’t fit into a pocket it locates on the side brackets see B16D.? 330307C locates into a little pocket and then hooks into an attachment at the fin LE see B16C. Start to loosely lace the sides and top of the cover in a zig zag formation, but do not tighten, you may also use cable ties for this if preferred.? Attach tube 324 (shown in B16). ? Lace up the bottom of the cover starting at the back, working your way forward, time will need to spent on this to get it nice and tight. Continue lacing up the sides and top until the fabric is tight.? You will find that after a few days further tightening can be achieved. ? ? ? ? ----- Original Message ----- From: wannagoflying@... [X-Air_Ultralight_Aircraft] To: X-Air_Ultralight_Aircraft@... Sent: Wednesday, July 27, 2016 2:12 AM Subject: X-Air Ultralight Aircraft Ottoman Fuse sails ? Still struggling on the fuse sails.. When we get one end or side lined up the other is off. Then I can't seem to pull the bottom together . Never been so frustrated . I have pics but I'm not sure how to put them on here. Is there aomething were missing her or were the sails just poorly made?

Previous Topic Next Topic