¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Does the 5105 support an unamplified 8ohm speaker?


 

Hello everyone,

Is the title says can the 5105 use an external unamplified speaker? Also in menu number 6 there is a button that is marked s/p. You push the button and it goes between speaker and phone. Also the icon next to the volume level bar changes from a speaker to a headphone. Doesn't seem to do anything else. I was hoping it would change the characteristics of the headphone jack to a speaker jack but no joy.? Just wondered if there is something wrong with the radio or that's the way it works normally.? I would like to use it with a clear speech external DSP but it only supports speaker level input. Also an 8 ohm speaker itself doesn't seem to work.

--
Thank you,
Randy AB9GO


 

I can't answer your question directly, just add a bit of background.? First off, I prefer headphones, and have not tried using any sort of external speaker, either powered or 'plain.'? The headphone / speaker switch limits the volume of the sound sent to the headphones to 'protect the operators hearing' - all well & good, I suppose.


 

Yes, I have used a small, un-amplified speaker intended for use with a PC.? It did help 'some' to make the audio clearer.
--------
Doug, K8RFT


 

And, not too long ago, I bought a little "Ki" rechargeable powered speaker to use with the X5105.? It does give a volume boost!? I have not yet used the speaker "on the air" yet, though.
It is smaller than the old un-powered one, too!
--------
Doug, K8RFT


 

¿ªÔÆÌåÓý

Interesting topic for the X5105. I was not thrilled with the X5105 speaker and decided to DIY and built a custom, active stereo audio amp for this radio and other QRP radios equipped with a low-level stereo output jack. I found a similar kit to this on eBay and built it into an angled-front steel enclosure. The kit looks like this:

?

?

It comes with 2 full range 1-inch speakers and powered by 5VDC. Just use the 2.5mm provided audio cable to connect between rig and audio amp.

?

Upon first usage, I realized that amp audio spectrum was designed for music (approx. 100 ¨C 15000Hz), too wide for this application. So, I found some web-articles on mechanical tuned ports for voice bandwidths and came up with PVC-pipe tuned ports that narrow the bandwidth to about 3KHz, or approx. 5000 ¨C 8000Hz. I also added a switchable, passive LC crossover filter to help with the low bass/high treble rejection and a large volume control. In addition, I run it on a rechargeable NiMH rechargeable 9VDC battery that fits on the back and is long-running for /P POTA operations in the field.

?

This amp is spectacular as it fills the area with loud, filtered CW. I would suggest this product for anyone who has an X5105 and does not like the OOB (Out-Of-Box) speaker audio. Finished product is below. Not pretty, but very functional ?

?

Best 73, Lou N2JPR

?

?

Sent from for Windows

?

From: DougVL
Sent: Wednesday, October 4, 2023 2:37 PM
To: [email protected]
Subject: Re: [X5105-Users] Does the 5105 support an unamplified 8ohm speaker?

?

And, not too long ago, I bought a little "Ki" rechargeable powered speaker to use with the X5105.? It does give a volume boost!? I have not yet used the speaker "on the air" yet, though.
It is smaller than the old un-powered one, too!
--------
Doug, K8RFT

?