开云体育

The X5105 has stopped transmitting, or more accurately has stopped modulating. There is no output registered on the output power meter in any mode. The SWR scan is all over the [lace on 80m and a flat

Hi Doug, I have exactly the same. If I turn the tuning dial slowly or change the direction of rotation, no pulse is counted and the display does not change. I have this in several devices where rotary

When I tune around on any band, often when I reverse the turning direction, there is a 'click' or two of 'backlash' - no change in frequency with the first click, sometimes not even with the second

www.connectsystems.com is the new dealer and has them in stock )Usual disclaimers) Dave G. KK7SS

Oops!? I meant to also say that when I decided to get one this summer, MFJ was "out of stock."? I asked about when they might get some, and the answer was 'when the new model comes out.'? I've

I see that both Radioddity still sells them. Brian K0FBS -- Brian K0FBS

It might be best to ask those dealers directly.? And to mention the type(s) of support you might need. In the past, MFJ "supported" the units they sold, but apparently the support wasn't always the

Does this mean Radiooddity and MFJ are not supporting these?

What follows is a lengthy backstory. If you just want to see the answers drop down 3 paragraphs. ?Yesterday I ventured into the great unknown of making an audio cable to interface between my sound

I also found these info on the internet: an adapter cable specially made for a headset microphone. I have all the components to make that adapter cable in stock, so I see no reason to order them, hi.

Hi Doug, I also have an IC-706MKIIG and that microphone does not work on the X5105. I read that you should not connect the microphone of the X5105 to the IC-706MKIIG because the microphone would

Dick - Thanks very much for asking this!? I want to know the same thing, and for the same reason. I also have an IC-706MkII and its mic connections are the same as the '7000. I should try the Xiegu

Thanks Brian for your reply. That's what I thought and came across anomalies. The X5105's microphone is identical on the outside to Icom's HM-151, which comes with the IC-7000. Also a lot of

The 5105 seems to use the same configuration as the Icom radios. A switch setup for an Icom should work Dick. Brian K0FBS

Hi, Can someone tell me how to make PTT with the microphone jack? I want to use a headset microphone and a footswitch. If I connect 4 (PTT) to 7 (GND) the X5105 will not transmit. my headset

I can confirm that. Yvon AE7YD

I have worked with Jerry's organization now for a few years, he well supports all products that he sells. ?Also he has the necessary test equipment to analyze radios. ?A good guy to deal with. ?de

F.Y.I. Jerry Wanger of connectsystems.com is now the official dealer of X5105 radios for the USA.

Hi Doug, First; the problem.. Started to intermittently stop producing power, then quit! No problem on receive, ATU inoperative, SWR scan runs but shows off the scale! After communicating with the

Sorry - can't resist replying! It"s a new group, with not a lot of users - - Yet!? So, not a lot of activity.? Thanks for adding some. Welcome! While you're here, you could describe the problem that