开云体育

I have run into an ebay listing which has this in its description of a headset " designed to work on ICOM or XIEGU G90 IC - [phone removed by eBay]..7100..X5105...G90 ...X108G" -- That comes from the

From the users manual: page 31 ★Important? notes: When LINE IN is enabled, both built-in MIC and external MIC are not available. You probably checked this menu (page 32): #6-1? (MIC gain

Did that. Didn't fix it.

First off - check the ENTIRE set of menus.? Make sure you haven't somehow turned off the microphones, or set the radio to a mode that doesn't use the microphone & turned them off.? Consider not

Has anyone had experience with updating the firmware on the 5105 using a Raspberry Pi? No access to a windows machine at present. Thanks Steve M0NGZ

All mentions of the CW decoding capability that I've seen have described it as "poor".? Other radios, such as the FTDX10, also have CW decoding, and also do not work well. -- Doug, K8RFT

Radioddity was the dealer when I bought my X5105, and they have someone who has helped other users with service and technical information.? There is also another, newer dealer who has also proved

Indeed an X5105 firmware update is long overdue. However, working with what I have got I am keen to separate the components of the problem into those relating to idiot operator (me) and those relating

This is completely a shot in the dark but what if you reflashed the firmware? Kevin W2NC

That’s a great question, Brian. ?I honestly don’t think anyone really knows. ?I would love to be proved wrong, but my impression is unless it’s fixed in a FW update it’s going to remain

Michael, I am not aware of a US-Based Service Center. However, I do wonder if you have the radio set for line input instead of for microphone input? Just a thought that came to me while I was reading

My radio's microphone (both the one on the radio and the hand mic) is not working. I bought the radio from MFJ and they don't support it anymore. I spoke to Radioodity and they say it needs to be sent

As has been previously observed, the CWDEM feature (V3.0 firmware) is a bit hit and miss when compared with other decoders (EG Morse Expert on Android) and certainly poorly documented. To ensure that

For anyone wanting to make a microphone circuit wiring adapter (for a headset), I ordered this item from Amazon.? It might help making the connections.? It is an adapter with an RJ45 connector, a 6

Dick's post with the Icom diagrams is very helpful. What I just finally noticed there is the ICOM description for pin 3 - grounded to indicate that the HM-151 [microphone] is connected.? Maybe we

I recently added a new rig (FTDX10) and wanted to try using a headset with it.? I ordered an adapter cable from this site: https://w2eny.com/ He sells a lot of adapters and headsets on eBay, but has

Been trying to adapt another headset to the X5105. So far, I found that I need to ground MICE and MSVSW for PTT to work. (Maybe just MSVSW, but the stock mic grounds both.) The stock mic audio is

Question with the IF output set to ON,? and using the output for a panadapter does the IF switch off and back on? when the PTT is push/released?

There's? a setting in the Main Menu to turn the I.F. output on and off. -- Doug, K8RFT

" I checked my unit and IF Output is Off. Power cycling the radio does not enable it." There's a setting in the Main Menu to turn it on and off. -- Doug, K8RFT