开云体育

Hi, ? My X5105 goes to 12.6V and no more, from new.? Not sure about the serial number question. ? Karl

The radio is pretty much as new. I am just? not using it, preferring my monoband CW rigs for portable/hiking. Comes with manual, original mic and data cable. $465 plus shipping from NC. Tnx, Dale

My internal battery charges up to 12.3V then says it's full. Is this about what others notice also? Another question, how can I tell when my X5105 was manufactured from the serial number? Joel N6ALT

That will help.? We can only know about what you actually write in your posts. Now, what program were you using when you got the error - WSJT, or something else? Is that the only error you've

Hi Doug, I finally had time to take a look at things. I have WSJT-T loaded and running. I have the radio hooked up to my digirig mobile interface and configured. I have the Icom-IC7100 selected in the

In addition, the old post #92 in this group has a schematic that was reported to be for the mic input circuit, but that's not guaranteed to be correct.? The diagram shows "PC board connections" type

I received this email earlier this week. Hope this email finds you well! Thanks again for your patience with the?Xiegu X6100?HF Transceiver, and finally,?IT'S ALMOST HERE!! Mark your calendars as

I have read somewhere about an encoder change, but on a different radio.? Try checking the Xiegu G90 group - maybe it was there.? Or at least maybe someone there has done it. -- Doug, K8RFT

I also have an Abbree 27 mHz, 15 inch flexi whip, intended for CB.? With the X5105 tuner, I could get SWRs under 1.5:1 on 10, 12 and 15 meters, but not 20 meters.? It was purchased through eBay, and

Well, now at least you've described one symptom - the radio locks in transmit. Maybe I should say again, we can't troubleshoot if we don't know the problem. I already suggested using the IC7100 rig

Hi Doug, Thanks for getting back to me. The issue is that I don't know what I don't know..... I have been mainly trying to get FLRIG to work correctly, I haven't even tried JS8Call yet... Its hard for

Oops, I should have also mentioned that you can use the standard settings for the IC-7100, to work with the X5105.? That's how I do it, with no FLRIG? involved. -- Doug, K8RFT

It would help if you describe your issues, and also the settings you are using now in flrig and wsjt-x. For example, is wsjt-x set 'right' for PTT control?? What are your current PTT settings? Doug,

Greetings, New member here on this Group. I am quite new to the Amateur Radio hobby, and really not that skilled. I am interested in HF Digital comms and have owned the X5105 since late January. I

Yes, I have a GRA-1899, *very* much like the MFJ.? But it feels so heavy to use when the radio is hand-held.? And because of the way BNC connectors work with the spring inside the male connector,

MFJ has the MFJ-1899t with BNC connector and Comet has the HFJ-350M Toy Box, and there are several more; I have the MFJ-1899T that I find satisfactory, I have used it in 80 with good results. Cesar

If you have an earbuds-with-mic set, and the mic is in the cord down below the buds, you might be able to us that if you tape the mic onto the radio right next to the speaker. Dollar Tree stores often

Yes, I have headphones I’m just looking for something I can use when I film with that picks up the sound good.

I got a new antenna the other day.? I haven't gotten out to use it yet, but it sure seems like a nice one. It's one that can mount directly onto the radio's BNC connector, for 'walkie-talkie' type

I use a pair of cheap headphones that I've had for ages!