开云体育

I’m not sure if this was covered here or not but picked up one of these great little batteries and wanted to share my thoughts on it. Bioenno Power model BLF-1203 12V 3AH 36W hours lithium iron

I saw a note on the Xiegu G90 group that said that the G90 now had FLRig computer control support. Checking up on that to see if the X5105 is included, I found that it is!? Or at least it looks like

Hi Tony Did you succeed in finding the schematics of the xiegu X5105? 73 Giovanni, HB9EKH

It sounds like you needed to order one of these, too --> 14MHz Ham Amateur Radio 20 Meter Band HF QRP BNC Telescopic Antenna (

The radio doesn't care much about the source, just the voltage is within factory specs and the current capability is high enough. I suppose there could be problems if the supply had a LOT of noise in

Hi I'm looking for the Service Manual or at least schematics of the xiegu X5105. I Need these documents because I have a broken Transceiver I would like to repair. Thank you in advance for every

Thank you to all who replied and helped. Everything is working fine now both by pushing the XFE on the mike or the PTT on the radio. Sorry for the late feedback I have been busy with work. 73, to all

Justin I am not aware of that capability in the 5105. It may be possible but I don’t think so. Brian K0FBS -- Brian K0FBS

I just scanned through most of the comments here on this thread so excuse me if this came up but I was able to transmit the message by quick pushing MSG button on the bottom right, then make sure your

Thanks Doug, I actually need to correct my question but I think you understood the question. I originally asked “is it ok to operate the X5105 at an external power source” I meant to ask if it was

It will be fine. -- Doug, K8RFT

I have a MFJ-4230DMP 13.8v 30a power supply. ?Is this ok to operate the X5105 as an external power source and charge the internal battery in the X5105? the 30A MFJ is all I have at the moment

It is a fairly new group (list), but it is growing.? 2 new members in the last couple of days, we're up to 52.? Spread the word! I believe there's also a Facebook group - maybe a member? of that

I don't know who is writing the firmware for the X5105 but I had a G90 and it took them forever to correct some crazy issues with the CW filters. They eventually got it squared away. Seems to me that

Hi Larry, Didn't want you to go too long without someone acknowledging your question. That is an odd behavior. I don't work CW so I will let those guys respond with something helpful. Brian K0FBS

I have a brand new X5105 with version 3.0 firmware. There is a strange anomaly with the memory and bandwidth settings. When I set the tone to 700 Hz and Lower cut off to 600 and upper cutoff to 800

Thanks Brian! I figured 30 a 30 amp power supply would not matter, the rig will only draw a max current of 3amps. I just wanted to make sure that it would also charge the internal batter too. In other

Hi Justin, Yes, as the manual states any 12V, which is actually a 13.8V, source is acceptable to power and charge the X5105. Brian K0FBS Virus-free. www.avast.com -- Brian K0FBS

I have a MFJ-4230DMP 13.8v 30a power supply. ?Is this ok to both operate the X5105 as an external power source and charge the internal battery in the X5105?

The PL-660 soft case fits -just! Nothing else -just the radio. It's what I'm using.