开云体育

But - NOT with the X5105 (when I select either Icom IC-7000 or IC-7100). I have data stored in Memory Channels 1 and 2, but CHIRP just shows "error" when trying to read the memory contents. I did not

Thanks. Not ready to do anything just yet but Its’ only a matter of time. Mike K7ITL

Initial test of computer digital control of the X5105 - I connected my Xiegu USB CAT cable from Win7 laptop to X5105. Then started WSJT-X.? With the software set to the right COM port, and radio

Mike, the only point to pay attention to is the connection between the battery and the PCB. Keep everything on you desk, bench or table so that you don't drop the back panel with the battery. The

I’ve looked into FT-8 and a few other weak signal modes and they just don’t appeal to me. I want to talk to a human being not just add up more contacts or counties or countries or whatever. The

Ah. I get it. Well, my hopefully more compatible USB adapter will be here in a few days and I can get one obstacle out of the way. Mike K7ITL

I can confirm VOX will work for FT8. I have used the 5105 on FT8 and a windows 10 machine a couple of times and made contacts each time. I did not have CAT control and used VOX to trigger the rig for

I've been wanting to try the X5105 for FT8. And I would like a way to set up the X5105's frequency channel memories using a PC instead of using the rotary dial to slowly select each detail. Since

Chirp's web site says it works with Icom models including the IC-7000.? And, as I recall, Xiegu says to use settings (protocol) for the '7000. I've used Chirp a number of times for my UV-5R and it

OOps, I meant to mention that the Mac program would be a way to test your cable and connection - without changing your firmware.? You would know if the Mac could successfully communicate with the

Those are cool and interesting programs. If I get it, they are to control the rig like setting the frequency and such. Personally I don’t have much of a need for that. I’m operating portable and

I was 'finding' software to try out with the X5105, since Xiegu says its CAT works like an Icom IC-7000. One thing I ran across might be helpful for you - - on

UPDATE: *** https://www.vk4adc.com/web/index.php/software-projects/55-vk4adc-utils/49-icommems The program "Icom Explorer" works with the X5105. It's not quite 'simple' to use, though. "Icom Memories

What about Chirp Doug? Brian K0FBS -- Brian K0FBS

I had assumed that I would have to use VOX. I HAVE been looking into PTT control for use with a bluetooth headset/mic with a PTT switch module.? For that, I thought I would be required to use the PTT

Rock- I thank you also!? It's a very interesting condition - and observation.? Great job! And I copied your post into the group's "Files" section.? That should make it easier to find later on. --

Rev 2, page 8 says "28 EXT DC This 5.5mm X 2.1mm coaxial power jack, (+) center, is used to connect external DC power. " However, I found that my X5105, received in June, 2020 from a 'new' batch just

Noted and Thank you.. Dave KK7SS

Thank you!!! Stuff like this makes the forum so worth while!! Did you find that dissembling the beast was fraught with any hazards? Thing that I might break or misassemble? Mike K7ITL

Thanks for that Brian K0FBS