开云体育

9W7 Missing thread controller

[email protected] #4231 I am restoring a 9W7 and it is missing only one part, the exterior portion of the thread controller. It has the coil and the cover but from looking at pictures there is another piece that goes on top of that. Any suggestions on how to find one?? Loral
MB Freeman All Messages By This Member #4232 开云体育 Yes, I located that same part from a supplier in England, she does it for a charity and is extremely knowledgeable. Her web address: ?info@... Mary toggle quoted message Show quoted text On Mar 23, 2023, at 12:31 PM, liveforcm via groups.io <liveforcm@...> wrote: I am restoring a 9W7 and it is missing only one part, the exterior portion of the thread controller. It has the coil and the cover but from looking at pictures there is another piece that goes on top of that. Any suggestions on how to find one?? Loral Attachments: IMG_3209 Small.jpeg
Bill Wells #4233 I can see at least four missing pieces and two screws.?? This tension device was used on many different Singer models and parts should be available.? toggle quoted message Show quoted text On Thu, Mar 23, 2023 at 3:40?PM MB Freeman <bumby3@...> wrote: Yes, I located that same part from a supplier in England, she does it for a charity and is extremely knowledgeable. Her web address: ?info@... Mary On Mar 23, 2023, at 12:31 PM, liveforcm via <liveforcm=[email protected]> wrote: I am restoring a 9W7 and it is missing only one part, the exterior portion of the thread controller. It has the coil and the cover but from looking at pictures there is another piece that goes on top of that. Any suggestions on how to find one?? Loral Attachments: IMG_3209 Small.jpeg -- Bill Wells ronone69@...
[email protected] #4234 Thank you for the information! I’ll take a look.
[email protected] #4235 Good to know! I’ll look some more.?
Helen Howes Member Profile All Messages By This Member #4236 I have these. I'm not a charity, but I do have lots of parts HH
[email protected] #4237 Thank you Helen- I will take a look at your site.?
Bill Wells #4241 liveforcm,? While rebuilding the 9w7? I would like to ask if you could photograph parts of the machine.? I am working on a project and I do not have a 9w7.? First, I would like a profile view of an extended bobbin catch.?? What I have now is images from parts lists but these are half-tone and not good enough to show the outline.? Between W&W and Singer there are at least five different variations of this catch.? Thanks. toggle quoted message Show quoted text On Fri, Mar 24, 2023 at 2:08?PM liveforcm via <liveforcm=[email protected]> wrote: Thank you Helen- I will take a look at your site.? -- Bill Wells ronone69@...

Previous Topic Next Topic