Re: Wheeler & Wilson No 8 - How to sell?
I sent you a private message but I have no way of checking if it went through. If you didn¡¯t get it, let me know.?
|
Re: Wheeler & Wilson No 8 - How to sell?
Oops! I also missed the photo with the bobbins and miscellaneous.
|
Re: Wheeler & Wilson No 8 - How to sell?
Also, the mechanicals feel smooth. But, this is untested.
|
Re: Wheeler & Wilson No 8 - How to sell?
Sorry for the delay getting back to you all. I wanted to set it up and take some photos first. I'm in the Boston Area for folks that might be interested. I also have a love of Singer 201 - Singer 401 era sewing machines, the Pfaff 130, and walking foot machines for folks who might want to trade something that's in excellent condition.
|
Re: Wheeler & Wilson No 8 - How to sell?
It's great that you have the bill of sale! We would love to see a good photo of that showing the date and SN. Could you please post that and some photos of the machine in the photos section?
Thanks,
Kelly
|
Re: Wheeler & Wilson No 8 - How to sell?
I have one I would like to rehome. It¡¯s taken apart but has possibilities for refurbish. Has coffin top key and two missing wheels were replaced. Bobbin case and glass feet also. I¡¯m located in Delaware.?
|
Re: Wheeler & Wilson No 8 - How to sell?
I¡¯ve purchased four in the past year. Paid $100 for one, and about $50 for the other three. Two were found on marketplace, two were local auctions. ?The 8 is one of my faves. If you¡¯re near Philly I¡¯d happily give it a home!
|
Re: Wheeler & Wilson No 8 - How to sell?
joshb wrote:
> I happened upon a Wheeler & Wilson No 8 with the original treadle in great
> condition for its age- bill of sale says it was purchased October 1879.
> What kind of demand have you seen for a machine like this? I'm guessing
> they are common enough to not be a super valuable antique. I can certainly
That's right. They're uncommon, but not rare. Value goes up with condition,
and completeness.
> just put it up on marketplace or craiglist and see what it fetches if
> that's my only route. Hoping to find it a good home. Not so concerned
> about the money.
Well, letting us know where you live would be a start. Who knows, maybe
you're next door to someone here who's been dying for a No.8. :-)
I'd take a look at FB and CL and see what similar machines are fetching
in your area. You might also put it up in the classified section of a
sewing forum, like at victoriansweatshop.com. More targeted audience that
way.
Feel free to share pictures here, btw.
paul
=----------------------
paul fox, pgf@... (arlington, ma, where it's 70.4 degrees)
|
Wheeler & Wilson No 8 - How to sell?
I happened upon a Wheeler & Wilson No 8 with the original treadle in great condition for its age- bill of sale says it was purchased October 1879. What kind of demand have you seen for a machine like this? I'm guessing they are common enough to not be a super valuable antique. I can certainly just put it up on marketplace or craiglist and see what it fetches if that's my only route. Hoping to find it a good home. Not so concerned about the money.
|
Welcome! ?I¡¯m newish to the group myself. I have a 3, four 8 treadles, an 8 hand crank, and a 9W treadle. The WW history is pretty neat. ?
|
Re: Making New Early Model 8 Bobbins? #8
they were not too expensive
last year a girl in england made bobbin for old seing machinesthat she sold on ebay.? ? they works very well. in US you surely will find easily the ones you search!
|
Re: Making New Early Model 8 Bobbins? #8
last year a girl in england made bobbin for old seing machinesthat she sold on ebay.? ? they works very well. in US you surely will find easily the ones you search!
|
Re: Need needles for my
#8
ah, you are lucky in US, you can find treadle WW8? in the cabinets at flea market.? in Italy is quite different and most of people knows only 'the Singer of my grandma'... if they know her...
|
Re: Need needles for my
#8
I¡¯m anxious to see pictures of your new W&W 8. I just found one at flea market. Was in cabinet. Had most of the attachments, 4 bobbins, 4 glass feet, needles and a mouse chewed owner¡¯s manual that I was able to make copies of on my printer/ copier. Will be working on getting it cleaned up and running soon.? Also recently got a Singer 9W and a W&W 9 for parts or restoration. Love the unique look of these machines.? Hope you have good luck finding all the parts you need to get your machine going.
toggle quoted message
Show quoted text
On May 5, 2024, at 10:48 AM, Joshua Rivers via groups.io <joshua.rvrs@...> wrote:
?On Thu, Nov 12, 2015 at 06:06 AM, Miller Fulks <mmf38@...> wrote:
These are the 128x1 & the DBx1 needles. ? ?Both of these needles have a length to eye of 33.9mm so have to be pulled down off the stop by about 5mm.
How sensitive should I expect the WW8 be to that ~5mm? Is it closer to +/-0.1 mm or +/- 1mm? I'm about to start cleaning and getting my WW8 up and running. Also, I had a fun find with this machine... there was a WW MFG Co number 4 needle in the needle bar!?!? I'm so glad that I didn't just absent-mindedly toss out the needle w/out taking a close look at it. I wonder how old that needle is and how long it has been since this machine was actually used. (Also, sorry I don't have any fancy digital calipers, so no pics w/measurements... yet ? ) -Joshua/TX  
|
Re: Need needles for my
#8
On Thu, Nov 12, 2015 at 06:06 AM, Miller Fulks <mmf38@...> wrote:
These are the 128x1 & the DBx1 needles. ? ?Both of these needles have a length to eye of 33.9mm so have to be pulled down off the stop by about 5mm.
How sensitive should I expect the WW8 be to that ~5mm? Is it closer to +/-0.1 mm or +/- 1mm? I'm about to start cleaning and getting my WW8 up and running. Also, I had a fun find with this machine... there was a WW MFG Co number 4 needle in the needle bar!?!? I'm so glad that I didn't just absent-mindedly toss out the needle w/out taking a close look at it. I wonder how old that needle is and how long it has been since this machine was actually used. (Also, sorry I don't have any fancy digital calipers, so no pics w/measurements... yet ? ) -Joshua/TX
|
Re: Making New Early Model 8 Bobbins? #8
Joshua,
Not having experience printing and using?any of the available stl bobbin?files,?I can¡¯t answer your questions. ?I can tell you there are stl files for some bobbins on Thingiverse and in some other groups already. ?One day I intend to print out a few and try them.?
I have also read about individuals who have machined their own metal?bobbins. ?When the bobbins are rare and hard to find,?I would image the cost could become?competitive with purchasing originals.?
Carol Kio ?May 4, 2024, 2:01 PM, Joshua Rivers <joshua.rvrs@...> wrote: ?My main concerns/questions are:? 1. ?Not sure about how the 3D print material will handle being spun and the heat from that. Will it gunk up the inside of the bobbin case.? 2. ?I really have no idea about the cost of getting these machined from metal. I'm sure it can be done... but I can also see it being cost prohibitive.
|
Re: Making New Early Model 8 Bobbins? #8
Unfortunately, I probably won't have any results to report back for a while.... There were TWO bobbins with the machine!! (Plus the original manual?!! Plus 2 glass presser foot inserts!!) Well, if I've inspired anyone else to give bobbin making a shot, please let us know. In theory, it should be very doable... My main concerns/questions are:
- Not sure about how the 3D print material will handle being spun and the heat from that. Will it gunk up the inside of the bobbin case?
- I really have no idea about the cost of getting these machined from metal. I'm sure it can be done... but I can also see it being cost prohibitive.
Anyway I'll be sure to post something on here whenever I get around to trying out this little bobbin production experiment. But that could be quite a while... I mean two bobbins? That's all anyone "really" needs, right? ;) [1] A half-circle chunk, roughly 1.5" in diameter, is missing from the bottom center of the first 1/2 of the pages in the manual. It looks like a mouse found the book and thought it would make a good snack. -Joshua
|
Re: Making New Early Model 8 Bobbins? #8
joshua wrote:
> Has anyone around here had any luck, or attempted, to make any of the
> early style model 8 bobbins with 3D-printing or finding a machine shop to
> crank some out?
I suspect many here will be waiting to hear your results! (I don't recall
anyone trying this before.)
paul
=----------------------
paul fox, pgf@... (arlington, ma, where it's 58.1 degrees)
|
Making New Early Model 8 Bobbins? #8
Has anyone around here had any luck, or attempted, to make any of the early style model 8 bobbins with 3D-printing or finding a machine shop to crank some out?
Tomorrow, if all goes well, I'm picking up a model 8 with a S/N in the lower 300,000's. From the pictures, it looks like there is a little bit of thread coming out of the bobbin case. So I'm hopeful that I'll have at least one bobbin. But it would be nice to have a few more...?
I know some people w/3D printers, although I haven't tested their capabilities or the material capabilities. There are also several machinist shops in the area. I was thinking that making a bobbin couldn't be too difficult for either the 3D printer or the machinist. I have no idea on the pricing yet for the machinist route.
(I'm also going to modify a spare D9 needle bar to accept 15x1 needles for my 9W machine.)
Anyway, if anyone has tried this and failed or succeeded I'd appreciate any advice before I dive into this.
My apologies if this has already been brought up, I did a brief search and didn't see this covered.
Best,
Joshua
|
Thanks for sharing. I¡¯ve admired his knowledge from afar. Sad to hear of his passing.?
toggle quoted message
Show quoted text
On Apr 16, 2024, at 8:56 AM, LISA A via groups.io <Wiklundfamily@...> wrote:
? Paul, thank you for sharing that. So sorry to hear of his passing.? Great loss for our community.? Lisa
|
Carol Tallytwo Kio