Cancel that last request. Figured it out. It was these.
toggle quoted message
Show quoted text
On Jul 1, 2024, at 8:06 PM, Lochness via groups.io <latimerpb@...> wrote:
Hi everyone,
I was hoping someone could help me two mystery bolts that I have leftover from a recent carb rebuild. I was very diligent last time I did this and had no problem but for some reason this time I might have been in a rush so probably didn¡¯t label the little bag that I store my parts during taking them off during the rebuilt.
Here is what I was left over with. Pretty sure the ones on the left are the bolts for the electrical panel after replacing the battery. Now the ones on the right, I am struggling to find their home. They are 10mm just like the ones on the left so I don¡¯t think they are the ones to attach the air cleaner housing show as A in the pic below as they are 8mm if I am not mistaken. The bag that I put them in was labeled Air Cleaner Housing Bolts (A), but that didn¡¯t help me since I originally thought they were the right bolts for the bolts show as A in the service manual below. So unless I switched the bags and added the bolts for ¡°A¡± in the pic from the service manual into a bag labeled ¡° Air Holder Bolts¡± when they should have been in the bag that these darker ones ended up in called ¡°Air Cleaner Housing Bolts (A)¡±.
I am open to any suggestions as needles to say I am ready to ride again and this is driving me nuts (and bolts!)
Thanks in advance for helping my old brain figure this out!
Cheers
Paul
<IMG_1027.jpg><Screenshot 2024-07-01 at 7.58.45 PM.png>
