Pete
?
From the manual; my comments in ( ).
?
Loosen left axle clamp bolt. (Pinch bolt).
Loosen axle. (unscrew).
Raise front wheel off the ground (special jack they say, but
you can improvise).
Pull out axle and remove front wheel.
?
In other words, just unthread the axle and pull it out, after
loosening the pinch bolt.
?
Dennis
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Wednesday, July 04, 2007 10:14
AM
Subject: [W650riders] How to remove the
front wheel.
Firstly, thanks to everyone who replied with help on my shimmy problem.
hopefully when I get a new front tyre to match the new rear, it will go
away. However, until then, I have just tried to get the front wheel out
but it looks like 2 rather large hex wrenches are required. Is one side
a 'bolt' and the other a 'nut', or are both fixings 'nuts' I also
presume the 2 forward face hex socket screws come out as well. sadly,
there are no wrenches in the tool kit.
So what is the correct
procedure for front wheel
removal?
Thanks,
pete
