Just For Your Information.? ? Attached is a photo of the BACKSIDE of the cover, and the box that i got from Home Dpot.? There wern't many choices.
The battery was glued in place (for better or worse)? ?2 days ago for stability.
I've picked a location and will cut a rectangular hole for a 20x4 display --- With a bezel a 16x2 can be accomodated.? ?We can caulk or RTV for waterproofing.? ? I finally have ONE? ?20x4 display....
There is enough room above the battery to allow me to install 4 buttons.? ? I tried to accomodate the physical layout of the Ashhar v1.0 board, while also allowing what I'm calllng the Stapletonv1.0 board (which Dr. Stapleton kindly layed out, had made, and BUILT 5 copies of, to the Ashar 0.1 schemtic -- and it WORKS) -- the displays may be on wires to make these work, doesn't matter for getting through the FDA.? (Matters if youre building 5,000!)
The only purpose here is to let the software FINISHERS? (not developers, FINISHERS!)? know roughly where I' going.? ?Somehow we have to FINISH this project.? ?The little transducer board/power switcher will fit on a side or somewhere.? ?i will likely mount the main board to the cover of the case, on standoffs ( I got in an assortment)?
First I have to go build the transducer/power supply board....so that's what I'll be doing for the next hour or so....)
Time to FINISH this project.
Gordon
