开云体育

Thanks for all the help on the oil fill problem, seem to have that resolved. Now another problem, have a oil leak around shaft behind driven pulley. Don't see a seal in the parts manual. A question now is, I can't find any vent for the gear case. I have been working on everything from auto's to large machinery for about 60 years and have never seen a gear case using oil that wasn't vented. Would adding one be an advantage or a disadvantage. All comments welcome. Thanks all. On Sat, Jan 22, 2022 at 12:44 PM, Randall Rose via groups.io <randyj7210@...> wrote:

Any ideas? I'm "assuming" the spindle is threaded. TIA Ron

22M I’ll post better pictures as I start working on it

Recently purchased a Van Norman 22LU, monster of a machine appear to have been used very little. Iva had to make some repairs and such but im looking for more information about this machine. I've downloaded both the "manual " and the accessory manual from VintageMachinery.org but need more information on wiring etc. I've found the Gusher pump for this machine but also need a wiring diag for that, I would also like to find an overarm support if possible, I can make one but...

I have the following collets for sale to our group. Hopefully everything will go to good homes here, first. Prices range from $25 to $35 each plus postage. They are both VN OEM and Hardinge in this sale. Each collet will be tested on a clean draw bar. Any threading issues will be in the description I send you before purchase. The prices are firm and this is not auction. Please read the instructions below. Failure to do so result in your order being overlooked. Sizes Available (3) 3/32” collets: $25 each (4) 1/8” collets: $30 each (1) 5/32” collet: $25 each (2) 3/16” collets: $ 30 each (2) 7/32” collets: $25 each (4) ?” collets: $35 each (3) 9/32” collets: $25 each (2) 5/16” collets: $30 each (5) 3/8” collets: $ 35 each (1) 7/16” collet: $35 each (5) ?” collets: $35 each (1) 9/16” collet: $35 each (5) 5/8” collets: $35 each Buying Process: Email me the list of sizes you want castebbins@.... Please put “VN collets” in subject line. To be fair you can only get one of each size requested. a) I will not process orders left in the thread. They must be emailed to respect everyone’s privacy. b) Orders will be processed in the order I receive them. c) Be ready to respond to follow up emails in a timely fashion (24 hrs), or I will move on to the next request. Orders will be processed in the order I receive them. Be ready to respond to follow up emails in a timely fashion, or I will move on to the next request. I will gather your order and email you a set of images of the collets you will receive. I will offer them in the order of condition, with best looking going out first. You will approve my offering in an email and send me a payment, either by PayPal “family & friends” or personal check. Shipments will be held until checks clear. I will mail your order via USPS Priority mail in flat-rate boxes, with a tracking number I provide you. Eight collets will fit in a small flat-rate box. I’m not Amazon, so your patience is preferred. Email me your questions.

I'm sure I took a lot of photos of my equipment, but this is all I have handy. I added DRO's to the mill years ago after getting a job to build some camera bodies for a company in Israel. The dimensions were metric and rather than do the conversions on all numbers and create some errors, I chose to add DRO's to the machine on all three axis. I added an old photo of me making chips. The DROs I used were from a small company called Shooting Star, don't know if they are still in business. Jim

I am happy to join the new VanNorman group. I have a mostly pre 1960 USA manufactured machine shop. My next project will be a 1960ish 16M. I bought the machine with VN vise, misc end and shell shell mill adapters along with some horizontal arbors. It's in decent shape but needs a major clean-up and cosmetic refurb. My first mill was a VN 6 and I'm looking forward to working another VN mill