开云体育

I might be interested. PM me at n4tkh@... The Reverend Thomas Heard fr.thomas.heard@... +1.314.650.5010 [email protected]> wrote:

Anyone here looking for an Alinco DR—135? [email protected]> wrote:

Good move, you won't look back. We made the switch a year ago.

Automatic.

Does the Winlink orginization need to know about changing a gateway from packet to VARA FM to update servers, or is it automagic? Thanks / 73 Steve W6SJK

I ended up deleting all the WinLink programs on my computers and reinstalling. That solved my problem. Thanks to everyone that replied to my posts. Nice to know there’s help around if needed. 73

If you cut/paste the password, sometimes it works if you type it in. Worked for me once! vb

Norm it would be better to post this in the Winlink programs group where the Winlink Development Team can assist you with Winlink password issues. Even though some of the WDT are here in the VARA

Contact Winlink Support

All of a sudden when I open up winlink express i get a message that states "The password you specified for K7NWF on the site Properties screen does not match what the Winlink sytem expects . I have

Harley; Additionally, you need to have your digirig CAT serial port address ('COM nn') selected in the "Serial Port to Use" drop-down field. The default 9600 "Baud" value will probably work OK, but

Harley; I believe you'll need to have rig-control working in order to have the M803 properly set the antenna tuner to the band / frequency you're working on. To enable rig control, set the value in

Your high SWR is most likely a result of your tuner being set to another frequency or not being activated. Many tuners default to the last frequency that they were tuned to and you might be trying to

That's weird. I don't think software can cause a high SWR, but I don't know everything so I'm curious to see what someone else says. For your question about cat control, the digirig online forum

Yes Don, that's my next stop. Thanks for the heads up Norm - K7NWF

I am attempting to setup VARA HF with my Windows Laptop, ICOM M803 Marine SSB connected with a DigirRig Mobile sound card device. I have very good luck with Pactor modem on the same HF Winlink RMS

There is a group /g/N3FJPSoftwareUsers that may be able to help. I know it worked for me on Windows 10. I only use it on my portable computer as I have no exterior

I have verified all my settings are correct, however, still can't get N3FJP AC contact log to work. Kinda at a loss at this point. Norm - K7NWF

You might try the programs API settings. I use the program but have not tried it yet with varac. Later today I will give it a try and let you know how it goes. Greg [email protected]> wrote:

Good morning. I am new to the group. Just started using VarAC and have a question. I normally use N3FJP logging software, however, I cannot get it to work with VarAC. Are there any users out there