开云体育

That’s fine used on qrz 73 de K3FZT/Steve --Steve Davidson K3FZT Winlink Gateway K3FZT-10@... direct or via W3EOC-3 Supporting VARA FM Wide/1200bd Packet WIRES-X Room #85218 “MARC-DARBY”

FTM-6000 find knew on qrz.com for ~$250-300 73 de K3FZT/Steve --Steve Davidson K3FZT Winlink Gateway K3FZT-10@... direct or via W3EOC-3 Supporting VARA FM Wide/1200bd Packet WIRES-X Room #85218

Let's say under $400 -- The Reverend Thomas Heard fr.thomas.heard@... +1.314.650.5010

Can you put a dollar amount on "not-to-expensive"? Mark - AD7EF

Bob, Can you confirm that when the TYT transmits the Auto-Tune you actually hear 10 different levels of volume from the monitor receiver? Also - where on the VU meter does the receive audio level

Thanks for that. Any suggestions for a not-too-expensive VHF that would handle VARA WIDE?

Unfortunately, the Chinese made Alinco radios no longer have the DB9 interface for wideband audio..The DR-135 was the last of the made in Japan Alincos before they folded and TYT acquired the name and

Keven, I just ran Auto Tune on the DR-135 and it works correctly, I can hear the audio volume increasing in steps on another radio and then I get the APPROVED banner. Same interface on the TYT Auto

Bob, Please do the following and report back: Using another radio to listen to your transmission from the TYT TH-9000D, initiate an "Auto Tune" from within VARA FM making the TYT radio transmit.?

Keven, Thank you for your detailed response. I apologise for hijacking this thread, so I'll contact you directly for any followup. You are correct that the receive audio should be on pin 2 and I

Hi, I'm looking at the above as the radio for a new Winlink Gateway. I'd use a Digirig Mobile as the interface. Is it capable of 9600 on Vara FM? Any thoughts on this application? Thanks and 73

Bob, I see that you responded to the wrong thread this morning - so I'll assume you're still having the issues. The RIM products are not mine <https://www.repeater-builder.com/rbtip/whoisrb.html> -

When I use the TUNE button on VARA FM on my PC, I have to click on the TUNE button a 2nd time to stop it from transmitting.? I believe the lable changes from TUNE to STOP, or something like that,

Sorry, I responded to the wrong thread. Please disregard.

Thanks,. Yes, I have no problem with the Alinco DR-135 radios. My issue is with the TYT TH-9000D and it does not have a digital mode channel programming option. It does have a connector on the

Gary; Some Alinco transceivers have provisions for data communications, with some form of dedicated 'DATA' connection apart from the mic and/or external speaker jacks. The key advantages of such a

The Alinco has a special button for digital modes. Make sure you turn this on. Gary [email protected]> wrote:

Bob, Not specific to VARA but perhaps a clue: I was working with a local group here in LA that supports an extreme marathon race in the mountains above the LA basin. We have a 220 packet network that

If the radio is transmitting and the RMS is responding, then the interface is working.? I would suggest turning the audio levels down (may have to use the Windows Sounds and Sound Settings apps) and

I am running Windows 10 for Raspberry Pi4B and VARA FM 3.8.4.? When I try to TUNE the soundcard ( Signalink USB) the PTT led comes on and the radio triggers but will not release with the CLOSE