开云体育

Stephan; You are correct about the FT-991A internal sound card system not having the audio bandwidth to fully support VARA FM 'WIDE" mode, but keep in mind that VARA FM RMS Gateway (and P2P) stations

The built-in sound card of the FT-991 (identical to the external Yaesu SCU-17 interface)? lacks the audio bandwidth for VARA-FM wide.? To achieve the highest speeds VARA-FM is capable of, you have

Thanks, Keith -- I received your message after switching over to VARA HF.? It looks like the only VARA-FM winlink server near me is not fully operational :-(? The signal coming from it is strong,

Dave K7XST wrote… I was going to ask if the message stuck in your outbox was P2P instead if Winlink format, but… I see where you connected to the RMS, but I don’t see any evidence that it

The RigBlaster Nomic is just an audio coupler/isolator - there is no sound card in it like the DigiRig.? You would have to connect it to another sound system such as the one in the computer -- or --

Sorry I meant IC -F320. I got it sending and receiving emails with a Digirig and Digirig cables, but not with the Rigblaster. So I need to spend a bit more time with the Riglaster documentation. It is

Hello -- I am connecting to a local Winlink RMS via VARA-FM.? Although I get a connection, my outboxes messages aren't sent, and I'm not receiving any messages I have coming in. Here are the messages

Hello, I am trying to set up mobile Icom IC-320 radio and West Mountain Rigblaster Nomic sound card to work with 2m RMS Winlink and VARA FM. The RMS Express program causes the radio to transmit and

another update has been made. fixes some issues regarding cpu usage.

Doug, That forced driver update from the manufacturer (Logitech) worked.? I have no idea why when using VARA HF for SHARES killed the connection.? So weird.? Thanks for your advice. -- 73, Rory

I would suggest looking at the USB device driver(s) for your hardware. I'm not talking about the standard stuff that comes in via Windows Update. Get the model number or serial number of the

A gateway will run at full speed without the need for a license, per Jose. However, when using Vara to send or receive your own email a license would be required to get the same effect. Not sure how

I will say that I have used W11 and my signalink for running both a RMS and APRS for months at a time with no issues. Greg

VE7KHI on Hornby Island is connected somehow to EM on the Islands just off Power River. I know he posted on the Winlink Google Group. 73 *Don PoapsNew Westminster, BC*VA7DGP DATA VA7QU VOICE *Winlink:

Thanks Don that's pretty much what I thought I'm looking forward to getting everything set up 73 Ron VA7HZ

Ron VA7HZ If you are using your callsign and you have it licensed. OK If you are using another call. You can use varafm barebones but getting a license you get opens up the audio tnc program. 73 *Don

Hello group, I am fairly new to some parts of Vara I have a registered copy under one callsign but I am looking to set up a vhf gateway as there is very little coverage in my area. I wish to use

Rory Is your keyboard connected to a powered USB hub? If it is a laptop keyboard then your computer should be always allowing you to work with it. If using an external keyboard (USB,) then I would

Hi all, So I tracked down the cause (kinda).? Only when I start VARA HF and the modem Sound Card is connected on the OUTPUT side to the Jupiter Sound Card.? The INPUT connection does not affect the

Hi, To all who responded, thank you.? Please note however the following.? This occurs when I start up this particular VARA.? No transmission occurs.? As soon as VARA starts up, the keyboard goes