开云体育

Not seeing the right window opening after download and install.. Youtube videos show a different window than Iam seeing.. After downloading I see VARA Chat v1.4.1, Winlink Express 1.7.20.0, and VARA

Going to Windows 11 IoT Enterprise LTSC version may solve some the of these sound setting issues.? Don't know, but that version description suggests more stability, and fewer operator restrictions.?

I had the same issue with Vara HF on my Icom 7300. I had to use the mic gain control on my radio to change the ALC. Maybe not the way it is supposed to work, but it did for me. Just a thought. 73,

On your sound settings in windows check and make sure your speakers and mike are set for 0.0db and that you do not have any enhancements set. Also make sure that your AGC is not ticked also. 73, Jim,

This is all very interesting. I am operating with the Yaesu FTdx10. When on FT8 with WSJT X, I am able to adjust the ALC to wherever I wish it tore. Generally, I keep it below half but above 1/3 and

Hi Chris, Indeed, the ham radio hobby can be quite overwhelming.? I work for a living in a non electronics business, and so it has taken years in some cases for me to actually getting around to

I agree with Dave. My ft991a yaesu has never run digital (varaHF, FT8 etc) well at low alc. My sweet spot for stable PO has always been around 7 adjusted with digital gain! Using that for years.

The recommended ALC level for digital modes will vary by radio manufacturer and possibly by model. The manual that comes with the radio should be your 'bible' for setting ALC levels for digital modes

Ken, “Once you learn how to use it, and how to interpret the info, it can be very useful!” I checked the link and it is overwhelming. Do you know of a good beginner resource that one could use in

For what its worth... I don't know why Jose recommends 1/3 ALC when using VARA HF. I have mine set to 0 ALC while still driving enough audio to achieve the 30 watts the radio is set to, and it works

Because those programs initialize the sound system as soon as they start.?? VARA doesn't initialize the sound card (and produce indications of it's presence in Windows) until the first transmission.

HI Doug, My Windows 11 didn’t allow me to go into a sound slider for vara hf. There is a sound slider in the sound card settings in vara hf, but moving it doesn't have much effect. When using FT8 on

[email protected]> wrote: Yes, it does. It's hard to tell from the manual whether it does or not, but it does. 73, Lee K5DAT

Does that radio have a soundcard interface built in?Thanks and 73,Jim, N8JE?Sent from my Galaxy

In Windows go to Settings / Sound. Do this AFTER you have VARA HF open and used it at least once. Look for VARA HF in the applications and adjust the volume slider there. The reason I mention making

Jim, I have a Yaesu FTdx10 and using a PC on Windows 11 with a USB cable to the radio Richard Richard A. Plotkin 6565 The Masters Ave Lakewood Ranch, Fl 34202 Cell: 401-862-4809 KZ4JV

What are you using for a radio and interface?Thanks and 73,Jim, N8JE?Sent from my Galaxy

I finally got vara HF running on Winlink express. However, I dan't get the ALC to the recommended 1/3. ?It hovers around 3/4 on the scale. What might cause this?

Pierre You need to contact the Winlink Google Group for help. I see many Linux and Android (WOAD) users asking for help. https://groups.google.com/g/winlink-programs-group 73 *Don PoapsNew

Any prob to log to winlink account and mail server