开云体育

Keith, You appear to have NR and /or Notch filter engaged. There must be nothing affecting the linearity of the waterfall. Should look like this:

Ok.Coming to the group shortly. Tnx. KP From: [email protected] <[email protected]> On Behalf Of Thomas KF7RSF via groups.io Sent: November 22, 2024 5:09 PM To: [email protected] Subject: Re:

Here it is….Not sure why two grabs showed up. Both are the same anyways. De Keith VO1AE Sent: November 22, 2024 5:09 PM To: [email protected] Subject: Re: [VARA-MODEM] VARA HF Anything obvious??

Keith, Post a screenshot of the VARA HF TNC waterfall when this occurs. A common reason for this "Channel busy" error is having the Filter 1 set to too narrow a bandwidth. It needs to be set to 3.0K.

Further to Below….Twice when I went from WinLink to FT8 I had to use the SD card to revive the settings, because I couldn’t transmit. For anyone that hasn’t made an SD backup…DO IT!!!!! Best

Here’s a screen grab of WinLink Express this morning. In a nutshell: I: ?I heard the cute little sounds from VO1GNP 2: In Channel Select I chose *Start* and the script? showed *VARA TNC* was

Jean, I am in the process of setting a link on the W6RAY-4 BBS in central California. I have it all set up, but working some minor issues still to be worked out. I plan to attempt connecting with

Hello, I am at work so it's a very quck reply 1) USB on all bands 2) Most of the winlink gateway are supporting vara you can get the list here 73 de Olivier HB9TOB [email protected]> a écrit :

It sounds like you have the idea. Be sure that the same input to the modem is selected under Settings ->Soundcard. 73 Danny, K5CG HH 550-0609 SKCC 14257 To: "VARA-MODEM" <[email protected]> Sent:

Thanks Lee, ???? I have not seen that.? Will try tomorrow. Jean

[email protected]> wrote: Hi again, Below is the info from the site. I just realized the SSID is incorrect for my BBS - should be K5DAT-1. [image: image.png] 73, Lee K5DAT

Hi Lee, the? TPRFN group ( https://www.tprfn.net/ ). will tell me the band but not the frequency. unless I did not look at the right place. Jean

[email protected]> wrote: Ahh, I see, you were looking for BBS's in operation, so Jeff's answer was a lot better than mine. As he mentioned, there are several BBS's using VARA HF that are part of

Hi Lee, ???? I am aware BPQ support VARA. I am looking for some who are on HF, Call and Frequency. VE2PKT Support VARA FM, but I am 2800milles, since there is no HF on PKT, I am looking for a door

[email protected]> wrote: https://www.cantab.net/users/john.wiseman/Documents/VARA.html 73, Lee K5DAT

There's a lot of BBS's that use VARA.? This link shows a bunch of them: https://www.tprfn.net/

Hello Jean Data is typically used on USB. Data would include VARA but is not limited to VARA. Other modes including ARDOP, FT8, WSPR, etc. would also be used on USB. 73 John Denison KD5YOU

Hello, Can anyone tell me how to monitor a VARAC conversation? I have set up another instance of VARA HF to run in monitor mode and have selected Monitor on the Monitor pull down. I can here the

Good day all, ????? I hope I am at the right place for those 2 questions: 1) is VARA HF in LSB or USB? 2) Is there on HF a Packet BBS supporting VARA? short and sweet. -- 73 de Jean, VA2OM /

In the Windows task bar, right-hand side. If an app is currently using the microphone, the icon shows up there, and if you click it, it takes you to the 'new' Windows 10/11 Settings app, which is not