开云体育

John. Any progress on getting your VARA running? Send me an email. Ken K7BXI Kencone@ Gmail.com

also remember to turn usb power setting to stay on, not to turn off to save power. Bill

Have you tried a different USB port or a different Signalink USB? To me it sounds like something is intermittent along the USB port/cable line since you were able to key up the radio in a tune, but

As I understand it, Speakers (Realtek Audio) is the default device in WIndows, and USB AUDIO CODEC is the default communications device.

Which is the DEFAULT sound device(s) according to Windows? Should be the Realtek Audio, not the USB AUDIO CODEC. If you plug the USB into a different port, Windows tends to assign the 'new' sound card

Thank you for the reply. Settings for Signalink are USB AUDIO CODEC for input and output. Settings for system sounds are Realtek Audio. 73, John N5CM

What are your settings in Windows Sounds and Windows Sound Settings?? (Right Click on the speaker icon in the toolbar at the bottom of the screen. -- Roy Dugger, KD6R

Steve, thank you for the reply.?? I tried the USB cable that I received with my WinKeyer USB, and I know this cable works.? Using that USB cable did not solve the problem. Jason at SIgnalink told

Cat control will have nothing to do with you not having any RX audio this is a Signal Link Issue. You say you have TX as you can adjust power out via the Signal Link So my guess would be you have the

I have ordered cables for radio control based on input from another op who uses VARA HF with his TS-480. I am beginning to believe that radio control (CAT control, rig control) of some sort is a

Excellent suggestions from posters.? Also do a search on your setup.? It is not uncommon.? CAT control will need to be a separate interface since Signalink doesn't provide that? (channel

Well we get what we paid for! Hi hi On Tue, May 28, 2024 at 7:21 AM, Travis Bruehl (K1AC)<bruehlt@...> wrote: Yeah I wish the winlink developers would add that for FM radios that have it. My old

Yeah I wish the winlink developers would add that for FM radios that have it. My old Kenwood TM-V71 and TM-D710 both have cat control, as does my IC-9700. It's surprising they never added it for

I didn't say you don't have "frequency control" when using VARA HF... only that the frequency control (via CAT) is implemented in the "Vara HF Winlink" or "VaraHF P2P" *session* component of Winlink

I use Winlink and Vara HF all the time and frequency control DOES work on my 7300 when doing P2P.

Noel, David... Don't blame VARA!! Neither the "VARA HF" or the "VARA FM" software-modems include any "CAT" (Computer Aided Transceiver) functionality. When either software modem is used with the

Ah, I did not know that.? Thank you. On Mon, May 27, 2024 at 5:24 PM, NOEL MORTIER?? W9NMM<noel@...> wrote: Vara fm does not have frequency control. Most vhf radios don’t have it

Vara fm does not have frequency control. Most vhf radios don’t have it so it is not in vara fm. Noel

I will get that error if my USB cable is unplugged while VARA HF or FM is running. If the cable is unplugged, makes bad contact or the cable itself is bad, then that error can appear. 73 John Denison

Having some issues with frequency control with VARA FM on the 9700.? Radio keys, but does not change frequency if selecting another station.? Works with other software (flrig and fldigi).? I've