Re: VARA on M1 Mac
Thanks Mark. This helps clear things up. 73 Bill
By
W4BRZ
·
#6260
·
|
Re: recommendation for HF rig
Find a nice used 7100. VARA FM and VARA HF in one easy to use box. Steve
By
Steve Fox KA4FOX <KA4FOX@...>
·
#6259
·
|
Re: recommendation for HF rig
I've used VARA (Winlink, VarAC) on the IC-7300, the IC-7100, the IC-7200, the FT-991A and the FT-891. By far the easiest rig to configure and run with VARA is the IC-7300. The IC-7100 is a close
By
Brian Haren - W8BYH
·
#6258
·
|
Re: recommendation for HF rig
I don't know about the Yaesu radios, but I also have an IC-7300 and it's a great data radio for the following reasons: 1. Being fully SDR, the audio response is completely flat on data modes, radios
By
G4AON
·
#6257
·
|
Re: recommendation for HF rig
FWIW, I run an Icom IC-7100 here. It is pretty small, puts out 100 Watts on HF, works great with VARA HF (et al), and can also do VHF/UHF. My 7100 has become my goto digital rig at home. Cheers, Ken
By
Kenneth R. van Wyk
·
#6256
·
|
Frustrated, can't get WinLink Vara to talk to IC 7300
I am moving to a new Windows 11 Laptop. I had VARA working on previous laptop. Now, when I select Vara HF from the drop-down and start a new session. The VARA modem loads, but i don't get the
By
Dick
·
#6255
·
|
Re: recommendation for HF rig
IC-7300 has been a dream to work with
By
Rob N7RLK
·
#6254
·
|
Re: recommendation for HF rig
Easy. Get an Icom 7300. Great radio built for digital modes like VARA HF. John Core KX7YT
By
John
·
#6253
·
|
Re: recommendation for HF rig
We have folks using the IC-7300 and FT-991 & FTDX-10? Just make sure you have a built in sound card W/usb. Use USB cables with a ferrites. HF speed usually won¡¯t be over 3-500 bps so internal works
By
Doug Lynch NNJ4EM
·
#6252
·
|
Re: recommendation for HF rig
991a. Works great vara hf, Vara fm. Winlink Ft8 Noel
By
NOEL MORTIER W9NMM
·
#6251
·
|
Re: VARA on M1 Mac
Bill; Your response doesn't address the fundamental question you originally asked (restated here)... This question can only be answered by Mac users who have actually used VARA HF and/or VARA FM on a
By
Mark Davis
·
#6250
·
Edited
|
Re: recommendation for HF rig
7300 ¡°just works¡± David E. Theriault KO4KHB
By
det <det_ranger@...>
·
#6249
·
|
Re: recommendation for HF rig
Mike AE4ML wrote¡ If you want / need VHF/UHF then the FT-9991A. I find it works very well for VARA HF. It also gives you C4FM. If not that the 991A, then perhaps the FT-710 or the FT-DX10. -- 73
By
Keith VE7GDH
·
#6248
·
|
recommendation for HF rig
Im starting to look for a new HF rig in the shack.? I'm using mostly for winlink and digital modes. I dont want to fight to get VARA-HF to work. Suggestions
By
Mike Lussier - AE4ML
·
#6247
·
|
Re: VARA on M1 Mac
Mark, At this point I have not tried Parallels on my M1 Mac Mini. I will be ordering it since several replies here and on QST have said it works. I am not worried about performance on the M1. It out
By
W4BRZ
·
#6246
·
|
Re: VARA SCREEN NOT SHOWING
Let's see, did you have have this running on a multi-monitor setup, and now you can't find an app when you launch it? Some apps are 'sticky' and will launch on the 'missing' monitor. Usually you can
By
Dave New, N8SBE
·
#6245
·
|
Re: VARA SCREEN NOT SHOWING
ALSO, next question should be, is it docked on multi sceen so its hidden, checked that too, its just not there.? I HATE EASTER EGG HUNTS!? ;)
By
Rob N7RLK
·
#6244
·
|
Re: VARA SCREEN NOT SHOWING
Did
By
Rob N7RLK
·
#6243
·
|
Re: VARA SCREEN NOT SHOWING
Did
By
Rob N7RLK
·
#6242
·
|
Re: VARA SCREEN NOT SHOWING
Did
By
Rob N7RLK
·
#6241
·
|