开云体育

Hi folks, You can not find it in VARA-HF settings. VARA-HF is just a great modem program. The setting is done in Winlink Express. Good luck and have a nice day. Peter , PE1DCD

I followed Lee's info and found the setting, see attached. Looks like it would do what you originally asked for. -- Gary Mitchelson NC3Z/4 Pamlico County, NC FM15 NC AHIMT COML SHARES NCS997

You are of course referring to VARAC v8.06, not VARA-HF. Best regards, Gary, K7eK

Email the? help? line for? updated key 73-G

I'm having the same problem.? What was your remedy?

I am not seeing this. * Which "settings' button? 1. I do not find it under the main screen "Settings." 2. If I chose VARA HF and open a session: I see how to add or subtract from "Favorites." Is this

I just loaded and re-setup my settings.. I like that I can change the font size on Beacons and CQ calls.... Everything works fine and my logging program is still working..

Daniel, No need to edit Channel List ......You can customize frequency ranges and exclude callsigns from within VARA! On the SETTINGS screen open "Automatic Connection Settings" and you will find

Is it possible to manually edit the HF channel list? ?In particular, I would like to remove HF channels I will never use (e.g. 80m band). ?This will make the auto-channel select feature more useful

Ok, thanks.

Yes it will be emailed to you. Roger KC7OM Sent: Saturday, July 15, 2023 11:56 AM To: [email protected] Subject: [VARA-MODEM] Activation I paid for activation earlier this morning. Do I wait for

Yes it will be emailed might take a couple days usually fairly quick Noel

I paid for activation earlier this morning. Do I wait for registration key number via email to enter? No directions were given. Todd AL7PX

I would expect that. The amateur RMS is restricted to P3. Doug Lynch President Aries International, LLC D: +1-321-415-2191 M: +1-478-318-2655<tel:+1-478-318-2655> E: Doug@... Port Orange, FL

Or, perhaps, the "amateur RMS" has an older PACTOR modem that is limited to P3. Mark - AD7EF

Where are those "amateur RMSs" located? If they're in the US, perhaps the controlling software on the RMS side is setting their modem to max out at P3. Mark - AD7EF

I have found that running both SHARES and amateur with the 7800 set to P4 when using amateur RMSs, it only links at P3 speeds. Not a scientific study. Just my observations. W4DBL Doug Doug Lynch Port

-Q Has the? pactor modem,? Ham call? restriction ? Tnx- Graham

i should have explained further. I already was using a physical PACTOR DR-7800 modem which includes SCS ALE and AES256 firmware. I use CoolTerm to control it as the SCS Chat ALE software does not

In the past VARA has worked very well with pactor using BPQ or Winlink to poll both modems. Its using one or the other. Not both at the same time. I am hoping that the powers that be will allow AF