开云体育

Bill You select encryption in the Pactor Settings. You'll need to contact Farallon in order to enable encryption with the modem. Jim Price KO6GM NCA9TC Communications Center Operations Communications

*Its secret -)* But you could try this You have to enter your special callsign in your? App ,? Winlink Express.? Vara chat what ever you are using to link? to the modem [Note the Vara Modem and

Where is there documentation defining the process to use the encryption option in 4.7.7? My station meets the requirements for non HAM operation from my phone ... Bill Scholz, 714-292-4271

Don't feel bad, the old kenwood radios are still better than most radios on the market today. This is why even used they are priced at $200 for a TH-D7, $300 for a TH-F6, $500 for a TH-D72, and

Y'all, are making my radio feel ancient! I am still using the TH-D7AG. It has a DATA port as well as a GPS port MIC and SPKR ports all separately on the side. ANALOG only, but it's still kicking along

you all are making my radio feel like a dinosaur now! I am still using my TH-D7G Sincerely, Mr. Chris A. Robinson KF6NFW / WQOQ661 wrote:

If you are outside USA check your licence. Encryption is not allowed here in UK.

It‘s a hand held but long out of production. D-Star and Analog. The connection is with a DigiRig on the Mic/Speaker.

The TH-D74 is a handheld. When you see Kenwood naming, the H in TH is Handheld.. The M in TM is mobile.. -Mark

Since the group here is on the topic of VARA - can you explain where in the VARA software you adjust TXD? Kevin

If it's "not just audio" what other waveforms other than audio do you believe exist? Kevin

I'm not familiar with that radio. It's not a hand held is it. Paulbuchanan51@... KO4QWS

Hi, I have an old Kenwood TH-D74 and use it successfully with Packet Radio (Bluetooth connection) or Vara FM with a Digirig (but only in a slow mode) 73 Erwin

This is why I brought up the TH-F6 which is not purpose built for data. Though it does have a TNC setting in the settings menu for external TNCs. My setup for Vara FM on the go is : Windows 11 Surface

This has been done since the beginning of packet in the very early 1980s.? It's called a setting called TXD (TX Delay) and determines a delay between PTT and the beginning of the data tones. Usually

Hi Pedro, I think you will need to use virtual audio cable connections between the ZS-1 software and the Vara software. Mike KV4TT

It's not "just audio".? If the class-D amp doesn't switch cleanly or isn't switched at a high-enough frequency, it can/will produce a lot of IMD (Inter -Moduation Distortion. This doesn't affect

The Kenwood TH-D72 and D74 are the rare exceptions among hand helds in that they are actually purpose-built for data.? The RX-to-TX and TX-to-RX turnaround times are optimized for data to support the

In the DK8OK guide you will see you need some Virtual Com ports as well. More software to install..... AND, be sure to read Jose's Vara Quick Guide which you can access on the Vara Help tab. Page 10

The way this is written seems to generalize that all Class-D audio power amplification results in distortion.? While some Class-D audio amps are terrible - (and the ones in these portable radios